Raymarine will NOT fix the old black Autohelm units last I checked. It might be worth a call, but the last one I sent in back in the 1990s at first they refused to fix and then decided they found some old parts and would fix it that ONE TIME if I promised to never ever send it in again.
Joe Della Barba Coquina C&C 35 MK I Kent Island MD USA From: ssjohnson via CnC-List <cnc-list@cnc-list.com> Sent: Friday, June 25, 2021 9:53 PM To: Stus-List <cnc-list@cnc-list.com> Cc: ssjohnson <ssjohn...@aol.com> Subject: Stus-List Re: Wheel Drive Autopilot Another alternative is to send the drive unit to Raymarine. $250 to fix any problem. I've done it a few times....pretty much need to doit every other year.... my LF38 is at/over the wheel pilot maximum displacement of 16,500 lbs Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Peter Cowenhoven via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > Date: 6/25/21 8:07 PM (GMT-06:00) To: Stus-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > Cc: Peter Cowenhoven <pscowenho...@yahoo.com <mailto:pscowenho...@yahoo.com> > Subject: Stus-List Re: Wheel Drive Autopilot Thanks so much Joe. Didn't know there was a belt on the 4000. Does it go around the whole wheel assembly? It's hidden nicely. I will probably do as you say and buy a new drive unit and see if that works. Sent from Yahoo Mail on Android <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature> On Thu, Jun 24, 2021 at 3:58 PM, Della Barba, Joe via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: I have an old AH-4000. If it starts doing what you describe the belt may be slipping or the pin that holds the drive gear is going. I have rebuilt my drive many times and my current unit is a combination of 3 or 4 old ones I have scavenged over the years. You can try and fix it or get a new drive for around $600 or so. It will work fine with the AH-4000 computer. The CPT is a much stronger unit, but keep in mind in both cases the weight of the boat is being used as a proxy for how hard the boat is to steer. These things are really only loosely related at best. An AH-4000 has plenty more power than needed to steer a freighter, it isn’t physically hard to steer a big ship. The issue would be the steering algorithms would be way off. If your boat is hard for YOU to steer, Otto will have a hard time too. After fixing or replacing your drive I would look to getting the boat to balance. All that said, the AH-4000 is hopeless in a big following sea. Joe Coquina C&C 35 MK I From: Peter Cowenhoven via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > Sent: Thursday, June 24, 2021 2:18 PM To: Stus-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > Cc: Peter Cowenhoven <pscowenho...@yahoo.com <mailto:pscowenho...@yahoo.com> > Subject: [EXTERNAL] Stus-List Wheel Drive Autopilot Does anyone have any experience with the CPT belt driven vs the old Autohelm 4000? Does the CPT have more turning force? I've got the old 4000 and many times it doesn't turn the wheel and just clicks. Certainly when there's a lot weather helm there's no chance. I'm also wondering if a new 4000 drive unit would be able to hold the force of the wheel better. I see the 4000 or the new EV 1000 is rated st 16,500 and I'm at about 13,500 while the CPT is rated to 40,000. Thanks in advance for any intel or thoughts on this. Best, Peter 84 Landfall 35 Westbrook, CT Sent from Yahoo Mail on Android <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature> Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray <https://www.paypal.me/stumurray> Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu