Auto bilge pumps usually have 3 wires. A ground and then one positive to use if you want it to be auto or one positive to connect if you want it to be manual. You pick what function you want and wire it that way. My guess is you wired it for auto by mistake? I’ve done that!
_ From Dean’s mobile 902 489 8556 > On Oct 17, 2021, at 10:52 AM, Robert Abbott via CnC-List > <cnc-list@cnc-list.com> wrote: > > My electric bilge pump has 3 settings, Auto (with a float to activate), Off, > and Manual. I turned on the Manual setting and the pump didn't come on. It > does work in the Auto setting....if I fill the bilge to lift the float or > raise it by hand, the pump works. > > Since and I am no electrician, any ideas where to look for the problem? > > Rob Abbott > AZURA > C&C 32 - #277 > Halifax, N.S. > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu