Dean
The Manual operation always worked so it was wired correctly ....I will
attempt to check the Manual connection.
Rob
On 2021-10-17 11:09 a.m., Dean McNeill via CnC-List wrote:
Auto bilge pumps usually have 3 wires. A ground and then one positive
to use if you want it to be auto or one positive to connect if you
want it to be manual. You pick what function you want and wire it that
way. My guess is you wired it for auto by mistake? I’ve done that!
_
From Dean’s mobile
902 489 8556
On Oct 17, 2021, at 10:52 AM, Robert Abbott via CnC-List
<cnc-list@cnc-list.com> wrote:
My electric bilge pump has 3 settings, Auto (with a float to
activate), Off, and Manual. I turned on the Manual setting and the
pump didn't come on. It does work in the Auto setting....if I fill
the bilge to lift the float or raise it by hand, the pump works.
Since and I am no electrician, any ideas where to look for the problem?
Rob Abbott
AZURA
C&C 32 - #277
Halifax, N.S.
Thanks to all of the subscribers that contributed to the list to help
with the costs involved. If you want to show your support to the
list - use PayPal to send contribution --
https://www.paypal.me/stumurray Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the
costs involved. If you want to show your support to the list - use PayPal to
send contribution --https://www.paypal.me/stumurray Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the
costs involved. If you want to show your support to the list - use PayPal to
send contribution -- https://www.paypal.me/stumurray Thanks - Stu