I purchased a roll of 3/8 in diameter foam from McMaster-Carr for that purpose. So, I used a few feet out of 100 ft roll, but it was way cheaper than any other option. Of course you have to find a proper adhesive. And I cannot remember what I used.
Bill Coleman Entrada, Erie PA On Sat, Feb 12, 2022, 14:35 Don Kern via CnC-List <cnc-list@cnc-list.com> wrote: > > Bob > > Right now my fwd hatch is at Atkins & Hoyle in Canada for a full refurb. > They should be able to help. Brian was very accommodating, his contact > info below. I tried a gasket replacement from West Marine and it was a > little too big in diameter. > > Brian Atkins > Atkins & Hoyle LTD > 180 Kimmetts side rd > Napanee Ontario Canada K7R3L2 > Ph. (613) 354 1919 > Fx. (416) 596 8989 > www.AtkinsHoyle.com > > Don Kern > *Fireball,* C&C35 Mk2 > Bristol RI > > On 2/12/2022 1:51 PM, Bob Mann via CnC-List wrote: > > > The foam gasket on my C&C35 mk I's forward hatch is coming apart. Can anyone > suggest where I can find a replacement? Nothing I've seen at hardware stores > even comes close to what is already there. > > regards, > Bob Mann > Mystic > Detroit > > >
