Thanks everyone!
I’ll just go measure the winch, I can’t seem to find that spec anyplace online.
As for the springs, last time I greased the winches one launched itself 
overboard. Back then they were in stock at West Marine. Maybe not so much now?


Joe Della Barba
From: Rick Brass via CnC-List <cnc-list@cnc-list.com>
Sent: Wednesday, July 13, 2022 3:01 PM
To: Stus-List <cnc-list@cnc-list.com>
Cc: Rick Brass <rickbr...@earthlink.net>
Subject: [EXTERNAL] Stus-List Re: Barient 26 winch questions


Can't help with the diameter, Joe, got 22's on my 25, and 25's, 28's, and 32's 
on Imzadi.



To prevent losing anything over the side, go to Office Depot and buy a 
cardboard box that is X by X by X, where X is a comfortable amount larger than 
the diameter of your winch base. I use 4" larger myself.



Or you can go to the post office and get a large flat rate priority mail box. 
Probably larger than you need, but it is free.



Assemble the box and remove the top flaps. Cut a hole in the bottom the 
diameter of the winch base. Put the box over the winch, and anything that jumps 
and anything you drop or spill falls into the box.



As far a springs go, as someone already said there is a source for Barient 
parts in New Zealand, though I don't believe it is Arco.

But check with your local West Marine first, that is where the packet of spare 
pawl springs for my Barient winches came from a few years ago, and I presume 
they still sell them.



Rick Brass

Washington, NC

-----Original Message-----
From: Stus-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>>
Sent: Jul 13, 2022 2:23 PM
To: Stus-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>>
Cc: Della Barba, Joe <joe.della.ba...@ssa.gov<mailto:joe.della.ba...@ssa.gov>>
Subject: Stus-List Barient 26 winch questions


Does anyone know the drum diameter of the Barient 26s that are on the 35 MK I?
Also do I dare take them apart for greasing? If a spring shoots overboard can I 
still get more?
Thanks!
Joe
Coquina


Reply via email to