Those are pretty much generic, just find and measure one from the other winch, and order a bag from McMaster!
Bill On Thu, Jul 14, 2022, 09:20 Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > > > Thanks everyone! > > I’ll just go measure the winch, I can’t seem to find that spec anyplace > online. > > As for the springs, last time I greased the winches one launched itself > overboard. Back then they were in stock at West Marine. Maybe not so much > now? > > > > > > *Joe Della Barba* > > *From:* Rick Brass via CnC-List <cnc-list@cnc-list.com> > *Sent:* Wednesday, July 13, 2022 3:01 PM > *To:* Stus-List <cnc-list@cnc-list.com> > *Cc:* Rick Brass <rickbr...@earthlink.net> > *Subject:* [EXTERNAL] Stus-List Re: Barient 26 winch questions > > > > Can't help with the diameter, Joe, got 22's on my 25, and 25's, 28's, and > 32's on Imzadi. > > > > To prevent losing anything over the side, go to Office Depot and buy a > cardboard box that is X by X by X, where X is a comfortable amount larger > than the diameter of your winch base. I use 4" larger myself. > > > > Or you can go to the post office and get a large flat rate priority mail > box. Probably larger than you need, but it is free. > > > > Assemble the box and remove the top flaps. Cut a hole in the bottom the > diameter of the winch base. Put the box over the winch, and anything that > jumps and anything you drop or spill falls into the box. > > > > As far a springs go, as someone already said there is a source for Barient > parts in New Zealand, though I don't believe it is Arco. > > But check with your local West Marine first, that is where the packet of > spare pawl springs for my Barient winches came from a few years ago, and I > presume they still sell them. > > > > Rick Brass > > Washington, NC > > -----Original Message----- > From: Stus-List <cnc-list@cnc-list.com> > Sent: Jul 13, 2022 2:23 PM > To: Stus-List <cnc-list@cnc-list.com> > Cc: Della Barba, Joe <joe.della.ba...@ssa.gov> > Subject: Stus-List Barient 26 winch questions > > > > Does anyone know the drum diameter of the Barient 26s that are on the 35 > MK I? > > Also do I dare take them apart for greasing? If a spring shoots overboard > can I still get more? > > Thanks! > > Joe > > Coquina > > >
