Good to hear. It seems it was much worse further North (Cape Breton and NL).
From: dwight veinot via CnC-List Sent: Monday, September 26, 2022 6:21 AM To: Stus-List <cnc-list@cnc-list.com> Cc: dwight veinot <dwight...@gmail.com> Subject: Stus-List Re: Fiona (was Re: C&C 35 MK I Keel Bolts) OK here for us in St. Margaret's Bay communities. A mess of limbs and downed trees to clean up but people all good near by. Lost power for a few hours here and some nearby neighbours still no power. Many people in NS still no electricity and some gas stations in Halifax ran out of fuel and lineups at Tim Hortons pretty long. I have a little Honda 2000i generator which allowed us to serve coffee and muffins to neighbours morning after the storm. On Sun, Sep 25, 2022 at 10:32 PM Marek Dziedzic via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Dwight, How did you survive the visit from Fiona? I hope you and your close ones are ok. Marek Ottawa ON Sent from my Android-based can on a string -------- Original message -------- From: dwight veinot via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Date: 2022-09-25 17:21 (GMT-05:00) To: Stus-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Cc: dwight veinot <dwight...@gmail.com<mailto:dwight...@gmail.com>> Subject: Stus-List Re: C&C 35 MK I Keel Bolts I think if you had water ingress and sloved the issue by tightening the nuts on your keel bolts then getting good effect from the bedding compound used was the problem. Anybody know what bedding compound was used on build. On Sun, Sep 25, 2022 at 3:32 PM Joe Della Barba via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: I hadn’t thought of that! The keel is slowly getting shorter. If I keep the boat another 50 years I won’t be aground at extra-low tide! Joe Della Barba Coquina C&C 35 MK I Kent Island MD USA From: Leeward Rail via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Sent: Sunday, September 25, 2022 1:24 PM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: Leeward Rail <leeward_r...@hotmail.com<mailto:leeward_r...@hotmail.com>> Subject: Stus-List Re: C&C 35 MK I Keel Bolts The keel bolts are in lead. Lead is soft and eventually they would pull upwards slightly. I would assume that is why. I have been planning to contact MARSKEEL and get some pro info. -- Sent from Gmail Mobile -- Sent from Gmail Mobile
