Joe, Does your 35-1 have end boom sheeting?
-- Dennis C. Touche' 35-1 #83 Mandeville, LA On Sun, Oct 23, 2022 at 11:37 AM Joe Della Barba via CnC-List < cnc-list@cnc-list.com> wrote: > I just now unrigged the mainsheet and replaced it with a 4:1 mainsheet and > cam cleat that I had as a preventer for a proof-of-concept. The preventer > has been on the boat for so long I forgot where it came from, but looking > at the mainsheet systems online and at Bacons it became obvious this IS a > mainsheet so I decided to try it out. So far it has only got a light air > test, I am loving the lack of friction compared to the stock system that > goes up to the mast and back to a winch. > My question is this; will 4:1 be enough? Bacon's has a 6:1 mainsheet for a > reasonable price, I can buy that and send the 4:1 back to preventer duty > easily enough. > > While I was at it I noticed the vang, one of those Quick-Vangs with a > spring, had the line fed through a turning block far enough from the mast > that it had a significant change in tension as the boom swung. I have no > idea how I haven't stared at this for decades and not noticed, the yard > installed it ages ago and I just never realized they did it wrong. Now the > line feeds to a turning block almost at the pivot point, changes in tension > will be almost nonexistant. > > > Joe Della Barba > Coquina C&C 35 MK I > Kent Island MD USA > > >