How to install rivnut without a tool: https://www.youtube.com/watch?v=I6H6wr7fJYo
-- Cheers, Jeff Nelson Muir Caileag C&C 30 - 549 Armdale Y.C. On 2022-10-31 12:04, Paul Fountain via CnC-List wrote:
I've used RivNuts on our vang after having issued with helicoils not having enough material to get a good hold in. I did buy the tool which made it a simple installation. -----Original Message----- From: Jeff Nelson via CnC-List <cnc-list@cnc-list.com> Sent: October 31, 2022 10:43 AM To: cnc-list@cnc-list.com Cc: Jeff Nelson <jhnelso...@gmail.com> Subject: Stus-List Re: Vang repair For Option 3: Could use a RivNut, which may increase the load bearing on the thin walled boom. https://www.boellhoff.com/ca-en/products-and-services/special-fasteners/blind-rivet-nuts-rivnut.php These are commonly available at hardware stores.
-- Cheers, Jeff Nelson Muir Caileag C&C 30 - 549 Armdale Y.C.
