Dave, that looks really good to me! I'm sure Dennis or others can advise
about the gelcoat, but I could live with it that way....; Is you new winch an
electric winch? What does the underside look like? are there any exposed bolts
in the cabin? Thanks
Richard
s/v Bushmark4: 1985 C&C 37 CB; Ohio River, Mile 596;
Richard N. Bush Law Offices2950 Breckenridge Lane, Suite NineLouisville,
Kentucky 40220(502) 584-7255
-----Original Message-----
From: David Knecht via CnC-List <cnc-list@cnc-list.com>
To: CnC CnC discussion list <cnc-list@cnc-list.com>
Cc: David Knecht <davidakne...@gmail.com>
Sent: Wed, May 10, 2023 10:41 am
Subject: Stus-List Re: winch mounting project
I finished my winch project yesterday and am quite happy with the result. I
used an aluminum plate as adapter as I had planned which I drilled and tapped
for the Harken mounting holes. Then I was able to reuse a number of the old
through deck holes plus several new ones to mount the plate (bed-it butyl
underneath). I am not happy with the white epoxy I used to fill the 2 exposed
old holes (you can see one just to the right of the winch). What do others use
to try to match the gelcoat and get a flat or textured surface? Dave
https://www.amazon.com/photos/shared/9mkyprjmQSaSBLUrQY4lHw.CzlycRs1-zBDtkut0IoMkz
S/V Aries1990 C&C 34+New London, CT
Please show your appreciation for this list and the Photo Album site and help
me pay the associated bills. Make a contribution at:
https://www.paypal.me/stumurray
Thanks for your help.
Stu
Please show your appreciation for this list and the Photo Album site and help
me pay the associated bills. Make a contribution at:
https://www.paypal.me/stumurray
Thanks for your help.
Stu