Hi I would like to know if it is possible to have the following configuration where there is a rate limit and codel algorithm configured over the same interface
tc qdisc add dev r1-eth0 root handle 1: htb tc class add dev r1-eth0 parent 1: classid 1:1 htb rate 10000kbit burst 15kbit tc qdisc add dev r1-eth0 parent 1:1 handle 10: fq_codel limit 1000 target 5000 interval 10000 noecn tc filter add dev r1-eth0 protocol ip prio 1 u32 match ip dst 0.0.0.0/0 flowid 1:1 Regards. Rodrigo [Ericsson]<http://www.ericsson.com/> RODRIGO ÁLVAREZ DOMÍNGUEZ System Engineer BICP DUNC PC NDO SD DPI SM Ericsson Ed.Milenium C/Via de los Poblados 13 28033 Madrid, Spain Phone +34615993132 Mobile +34615993132 [email protected] www.ericsson.com [http://www.ericsson.com/current_campaign]<http://www.ericsson.com/current_campaign> Legal entity: Ericsson, registered office in Madrid. This Communication is Confidential. We only send and receive email on the basis of the terms set out at www.ericsson.com/email_disclaimer<http://www.ericsson.com/email_disclaimer>
_______________________________________________ Codel mailing list [email protected] https://lists.bufferbloat.net/listinfo/codel
