http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/35529b95/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cec.h ---------------------------------------------------------------------- diff --git a/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cec.h b/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cec.h new file mode 100644 index 0000000..05dff63 --- /dev/null +++ b/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cec.h @@ -0,0 +1,751 @@ +/** + ****************************************************************************** + * @file stm32f7xx_hal_cec.h + * @author MCD Application Team + * @version V1.2.0 + * @date 30-December-2016 + * @brief Header file of CEC HAL module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F7xx_HAL_CEC_H +#define __STM32F7xx_HAL_CEC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f7xx_hal_def.h" + +#if defined (CEC) + +/** @addtogroup STM32F7xx_HAL_Driver + * @{ + */ + +/** @addtogroup CEC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CEC_Exported_Types CEC Exported Types + * @{ + */ + +/** + * @brief CEC Init Structure definition + */ +typedef struct +{ + uint32_t SignalFreeTime; /*!< Set SFT field, specifies the Signal Free Time. + It can be one of @ref CEC_Signal_Free_Time + and belongs to the set {0,...,7} where + 0x0 is the default configuration + else means 0.5 + (SignalFreeTime - 1) nominal data bit periods */ + + uint32_t Tolerance; /*!< Set RXTOL bit, specifies the tolerance accepted on the received waveforms, + it can be a value of @ref CEC_Tolerance : it is either CEC_STANDARD_TOLERANCE + or CEC_EXTENDED_TOLERANCE */ + + uint32_t BRERxStop; /*!< Set BRESTP bit @ref CEC_BRERxStop : specifies whether or not a Bit Rising Error stops the reception. + CEC_NO_RX_STOP_ON_BRE: reception is not stopped. + CEC_RX_STOP_ON_BRE: reception is stopped. */ + + uint32_t BREErrorBitGen; /*!< Set BREGEN bit @ref CEC_BREErrorBitGen : specifies whether or not an Error-Bit is generated on the + CEC line upon Bit Rising Error detection. + CEC_BRE_ERRORBIT_NO_GENERATION: no error-bit generation. + CEC_BRE_ERRORBIT_GENERATION: error-bit generation if BRESTP is set. */ + + uint32_t LBPEErrorBitGen; /*!< Set LBPEGEN bit @ref CEC_LBPEErrorBitGen : specifies whether or not an Error-Bit is generated on the + CEC line upon Long Bit Period Error detection. + CEC_LBPE_ERRORBIT_NO_GENERATION: no error-bit generation. + CEC_LBPE_ERRORBIT_GENERATION: error-bit generation. */ + + uint32_t BroadcastMsgNoErrorBitGen; /*!< Set BRDNOGEN bit @ref CEC_BroadCastMsgErrorBitGen : allows to avoid an Error-Bit generation on the CEC line + upon an error detected on a broadcast message. + + It supersedes BREGEN and LBPEGEN bits for a broadcast message error handling. It can take two values: + + 1) CEC_BROADCASTERROR_ERRORBIT_GENERATION. + a) BRE detection: error-bit generation on the CEC line if BRESTP=CEC_RX_STOP_ON_BRE + and BREGEN=CEC_BRE_ERRORBIT_NO_GENERATION. + b) LBPE detection: error-bit generation on the CEC line + if LBPGEN=CEC_LBPE_ERRORBIT_NO_GENERATION. + + 2) CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION. + no error-bit generation in case neither a) nor b) are satisfied. Additionally, + there is no error-bit generation in case of Short Bit Period Error detection in + a broadcast message while LSTN bit is set. */ + + uint32_t SignalFreeTimeOption; /*!< Set SFTOP bit @ref CEC_SFT_Option : specifies when SFT timer starts. + CEC_SFT_START_ON_TXSOM SFT: timer starts when TXSOM is set by software. + CEC_SFT_START_ON_TX_RX_END: SFT timer starts automatically at the end of message transmission/reception. */ + + uint32_t ListenMode; /*!< Set LSTN bit @ref CEC_Listening_Mode : specifies device listening mode. It can take two values: + + CEC_REDUCED_LISTENING_MODE: CEC peripheral receives only message addressed to its + own address (OAR). Messages addressed to different destination are ignored. + Broadcast messages are always received. + + CEC_FULL_LISTENING_MODE: CEC peripheral receives messages addressed to its own + address (OAR) with positive acknowledge. Messages addressed to different destination + are received, but without interfering with the CEC bus: no acknowledge sent. */ + + uint16_t OwnAddress; /*!< Own addresses configuration + This parameter can be a value of @ref CEC_OWN_ADDRESS */ + + uint8_t *RxBuffer; /*!< CEC Rx buffer pointeur */ + + +}CEC_InitTypeDef; + +/** + * @brief HAL CEC State structures definition + * @note HAL CEC State value is a combination of 2 different substates: gState and RxState. + * - gState contains CEC state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7 (not used) + * x : Should be set to 0 + * b6 Error information + * 0 : No Error + * 1 : Error + * b5 IP initilisation status + * 0 : Reset (IP not initialized) + * 1 : Init done (IP initialized. HAL CEC Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (IP busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 IP initilisation status + * 0 : Reset (IP not initialized) + * 1 : Init done (IP initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef enum +{ + HAL_CEC_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized + Value is allowed for gState and RxState */ + HAL_CEC_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use + Value is allowed for gState and RxState */ + HAL_CEC_STATE_BUSY = 0x24U, /*!< an internal process is ongoing + Value is allowed for gState only */ + HAL_CEC_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing + Value is allowed for RxState only */ + HAL_CEC_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing + Value is allowed for gState only */ + HAL_CEC_STATE_BUSY_RX_TX = 0x23U, /*!< an internal process is ongoing + Value is allowed for gState only */ + HAL_CEC_STATE_ERROR = 0x60U /*!< Error Value is allowed for gState only */ +}HAL_CEC_StateTypeDef; + +/** + * @brief CEC handle Structure definition + */ +typedef struct +{ + CEC_TypeDef *Instance; /*!< CEC registers base address */ + + CEC_InitTypeDef Init; /*!< CEC communication parameters */ + + uint8_t *pTxBuffPtr; /*!< Pointer to CEC Tx transfer Buffer */ + + uint16_t TxXferCount; /*!< CEC Tx Transfer Counter */ + + uint16_t RxXferSize; /*!< CEC Rx Transfer size, 0: header received only */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + HAL_CEC_StateTypeDef gState; /*!< CEC state information related to global Handle management + and also related to Tx operations. + This parameter can be a value of @ref HAL_CEC_StateTypeDef */ + + HAL_CEC_StateTypeDef RxState; /*!< CEC state information related to Rx operations. + This parameter can be a value of @ref HAL_CEC_StateTypeDef */ + + uint32_t ErrorCode; /*!< For errors handling purposes, copy of ISR register + in case error is reported */ +}CEC_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CEC_Exported_Constants CEC Exported Constants + * @{ + */ + +/** @defgroup CEC_Error_Code CEC Error Code + * @{ + */ +#define HAL_CEC_ERROR_NONE (uint32_t) 0x0000U /*!< no error */ +#define HAL_CEC_ERROR_RXOVR CEC_ISR_RXOVR /*!< CEC Rx-Overrun */ +#define HAL_CEC_ERROR_BRE CEC_ISR_BRE /*!< CEC Rx Bit Rising Error */ +#define HAL_CEC_ERROR_SBPE CEC_ISR_SBPE /*!< CEC Rx Short Bit period Error */ +#define HAL_CEC_ERROR_LBPE CEC_ISR_LBPE /*!< CEC Rx Long Bit period Error */ +#define HAL_CEC_ERROR_RXACKE CEC_ISR_RXACKE /*!< CEC Rx Missing Acknowledge */ +#define HAL_CEC_ERROR_ARBLST CEC_ISR_ARBLST /*!< CEC Arbitration Lost */ +#define HAL_CEC_ERROR_TXUDR CEC_ISR_TXUDR /*!< CEC Tx-Buffer Underrun */ +#define HAL_CEC_ERROR_TXERR CEC_ISR_TXERR /*!< CEC Tx-Error */ +#define HAL_CEC_ERROR_TXACKE CEC_ISR_TXACKE /*!< CEC Tx Missing Acknowledge */ +/** + * @} + */ + +/** @defgroup CEC_Signal_Free_Time CEC Signal Free Time setting parameter + * @{ + */ +#define CEC_DEFAULT_SFT ((uint32_t)0x00000000U) +#define CEC_0_5_BITPERIOD_SFT ((uint32_t)0x00000001U) +#define CEC_1_5_BITPERIOD_SFT ((uint32_t)0x00000002U) +#define CEC_2_5_BITPERIOD_SFT ((uint32_t)0x00000003U) +#define CEC_3_5_BITPERIOD_SFT ((uint32_t)0x00000004U) +#define CEC_4_5_BITPERIOD_SFT ((uint32_t)0x00000005U) +#define CEC_5_5_BITPERIOD_SFT ((uint32_t)0x00000006U) +#define CEC_6_5_BITPERIOD_SFT ((uint32_t)0x00000007U) +/** + * @} + */ + +/** @defgroup CEC_Tolerance CEC Receiver Tolerance + * @{ + */ +#define CEC_STANDARD_TOLERANCE ((uint32_t)0x00000000U) +#define CEC_EXTENDED_TOLERANCE ((uint32_t)CEC_CFGR_RXTOL) +/** + * @} + */ + +/** @defgroup CEC_BRERxStop CEC Reception Stop on Error + * @{ + */ +#define CEC_NO_RX_STOP_ON_BRE ((uint32_t)0x00000000U) +#define CEC_RX_STOP_ON_BRE ((uint32_t)CEC_CFGR_BRESTP) +/** + * @} + */ + +/** @defgroup CEC_BREErrorBitGen CEC Error Bit Generation if Bit Rise Error reported + * @{ + */ +#define CEC_BRE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000U) +#define CEC_BRE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BREGEN) +/** + * @} + */ + +/** @defgroup CEC_LBPEErrorBitGen CEC Error Bit Generation if Long Bit Period Error reported + * @{ + */ +#define CEC_LBPE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000U) +#define CEC_LBPE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_LBPEGEN) +/** + * @} + */ + +/** @defgroup CEC_BroadCastMsgErrorBitGen CEC Error Bit Generation on Broadcast message + * @{ + */ +#define CEC_BROADCASTERROR_ERRORBIT_GENERATION ((uint32_t)0x00000000U) +#define CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BRDNOGEN) +/** + * @} + */ + +/** @defgroup CEC_SFT_Option CEC Signal Free Time start option + * @{ + */ +#define CEC_SFT_START_ON_TXSOM ((uint32_t)0x00000000U) +#define CEC_SFT_START_ON_TX_RX_END ((uint32_t)CEC_CFGR_SFTOPT) +/** + * @} + */ + +/** @defgroup CEC_Listening_Mode CEC Listening mode option + * @{ + */ +#define CEC_REDUCED_LISTENING_MODE ((uint32_t)0x00000000U) +#define CEC_FULL_LISTENING_MODE ((uint32_t)CEC_CFGR_LSTN) +/** + * @} + */ + +/** @defgroup CEC_OAR_Position CEC Device Own Address position in CEC CFGR register + * @{ + */ +#define CEC_CFGR_OAR_LSB_POS ((uint32_t) 16U) +/** + * @} + */ + +/** @defgroup CEC_Initiator_Position CEC Initiator logical address position in message header + * @{ + */ +#define CEC_INITIATOR_LSB_POS ((uint32_t) 4U) +/** + * @} + */ + +/** @defgroup CEC_OWN_ADDRESS CEC Own Address + * @{ + */ +#define CEC_OWN_ADDRESS_NONE ((uint16_t) 0x0000U) /* Reset value */ +#define CEC_OWN_ADDRESS_0 ((uint16_t) 0x0001U) /* Logical Address 0 */ +#define CEC_OWN_ADDRESS_1 ((uint16_t) 0x0002U) /* Logical Address 1 */ +#define CEC_OWN_ADDRESS_2 ((uint16_t) 0x0004U) /* Logical Address 2 */ +#define CEC_OWN_ADDRESS_3 ((uint16_t) 0x0008U) /* Logical Address 3 */ +#define CEC_OWN_ADDRESS_4 ((uint16_t) 0x0010U) /* Logical Address 4 */ +#define CEC_OWN_ADDRESS_5 ((uint16_t) 0x0020U) /* Logical Address 5 */ +#define CEC_OWN_ADDRESS_6 ((uint16_t) 0x0040U) /* Logical Address 6 */ +#define CEC_OWN_ADDRESS_7 ((uint16_t) 0x0080U) /* Logical Address 7 */ +#define CEC_OWN_ADDRESS_8 ((uint16_t) 0x0100U) /* Logical Address 9 */ +#define CEC_OWN_ADDRESS_9 ((uint16_t) 0x0200U) /* Logical Address 10 */ +#define CEC_OWN_ADDRESS_10 ((uint16_t) 0x0400U) /* Logical Address 11 */ +#define CEC_OWN_ADDRESS_11 ((uint16_t) 0x0800U) /* Logical Address 12 */ +#define CEC_OWN_ADDRESS_12 ((uint16_t) 0x1000U) /* Logical Address 13 */ +#define CEC_OWN_ADDRESS_13 ((uint16_t) 0x2000U) /* Logical Address 14 */ +#define CEC_OWN_ADDRESS_14 ((uint16_t) 0x4000U) /* Logical Address 15 */ +/** + * @} + */ + +/** @defgroup CEC_Interrupts_Definitions CEC Interrupts definition + * @{ + */ +#define CEC_IT_TXACKE CEC_IER_TXACKEIE +#define CEC_IT_TXERR CEC_IER_TXERRIE +#define CEC_IT_TXUDR CEC_IER_TXUDRIE +#define CEC_IT_TXEND CEC_IER_TXENDIE +#define CEC_IT_TXBR CEC_IER_TXBRIE +#define CEC_IT_ARBLST CEC_IER_ARBLSTIE +#define CEC_IT_RXACKE CEC_IER_RXACKEIE +#define CEC_IT_LBPE CEC_IER_LBPEIE +#define CEC_IT_SBPE CEC_IER_SBPEIE +#define CEC_IT_BRE CEC_IER_BREIE +#define CEC_IT_RXOVR CEC_IER_RXOVRIE +#define CEC_IT_RXEND CEC_IER_RXENDIE +#define CEC_IT_RXBR CEC_IER_RXBRIE +/** + * @} + */ + +/** @defgroup CEC_Flags_Definitions CEC Flags definition + * @{ + */ +#define CEC_FLAG_TXACKE CEC_ISR_TXACKE +#define CEC_FLAG_TXERR CEC_ISR_TXERR +#define CEC_FLAG_TXUDR CEC_ISR_TXUDR +#define CEC_FLAG_TXEND CEC_ISR_TXEND +#define CEC_FLAG_TXBR CEC_ISR_TXBR +#define CEC_FLAG_ARBLST CEC_ISR_ARBLST +#define CEC_FLAG_RXACKE CEC_ISR_RXACKE +#define CEC_FLAG_LBPE CEC_ISR_LBPE +#define CEC_FLAG_SBPE CEC_ISR_SBPE +#define CEC_FLAG_BRE CEC_ISR_BRE +#define CEC_FLAG_RXOVR CEC_ISR_RXOVR +#define CEC_FLAG_RXEND CEC_ISR_RXEND +#define CEC_FLAG_RXBR CEC_ISR_RXBR +/** + * @} + */ + +/** @defgroup CEC_ALL_ERROR CEC all RX or TX errors flags + * @{ + */ +#define CEC_ISR_ALL_ERROR ((uint32_t)CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE|\ + CEC_ISR_ARBLST|CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE) +/** + * @} + */ + +/** @defgroup CEC_IER_ALL_RX CEC all RX errors interrupts enabling flag + * @{ + */ +#define CEC_IER_RX_ALL_ERR ((uint32_t)CEC_IER_RXACKEIE|CEC_IER_LBPEIE|CEC_IER_SBPEIE|CEC_IER_BREIE|CEC_IER_RXOVRIE) +/** + * @} + */ + +/** @defgroup CEC_IER_ALL_TX CEC all TX errors interrupts enabling flag + * @{ + */ +#define CEC_IER_TX_ALL_ERR ((uint32_t)CEC_IER_TXACKEIE|CEC_IER_TXERRIE|CEC_IER_TXUDRIE|CEC_IER_ARBLSTIE) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup CEC_Exported_Macros CEC Exported Macros + * @{ + */ + +/** @brief Reset CEC handle gstate & RxState + * @param __HANDLE__: CEC handle. + * @retval None + */ +#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_CEC_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_CEC_STATE_RESET; \ + } while(0) + +/** @brief Checks whether or not the specified CEC interrupt flag is set. + * @param __HANDLE__: specifies the CEC Handle. + * @param __FLAG__: specifies the flag to check. + * @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error + * @arg CEC_FLAG_TXERR: Tx Error. + * @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun. + * @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte). + * @arg CEC_FLAG_TXBR: Tx-Byte Request. + * @arg CEC_FLAG_ARBLST: Arbitration Lost + * @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge + * @arg CEC_FLAG_LBPE: Rx Long period Error + * @arg CEC_FLAG_SBPE: Rx Short period Error + * @arg CEC_FLAG_BRE: Rx Bit Rising Error + * @arg CEC_FLAG_RXOVR: Rx Overrun. + * @arg CEC_FLAG_RXEND: End Of Reception. + * @arg CEC_FLAG_RXBR: Rx-Byte Received. + * @retval ITStatus + */ +#define __HAL_CEC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__)) + +/** @brief Clears the interrupt or status flag when raised (write at 1) + * @param __HANDLE__: specifies the CEC Handle. + * @param __FLAG__: specifies the interrupt/status flag to clear. + * This parameter can be one of the following values: + * @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error + * @arg CEC_FLAG_TXERR: Tx Error. + * @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun. + * @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte). + * @arg CEC_FLAG_TXBR: Tx-Byte Request. + * @arg CEC_FLAG_ARBLST: Arbitration Lost + * @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge + * @arg CEC_FLAG_LBPE: Rx Long period Error + * @arg CEC_FLAG_SBPE: Rx Short period Error + * @arg CEC_FLAG_BRE: Rx Bit Rising Error + * @arg CEC_FLAG_RXOVR: Rx Overrun. + * @arg CEC_FLAG_RXEND: End Of Reception. + * @arg CEC_FLAG_RXBR: Rx-Byte Received. + * @retval none + */ +#define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR |= (__FLAG__)) + +/** @brief Enables the specified CEC interrupt. + * @param __HANDLE__: specifies the CEC Handle. + * @param __INTERRUPT__: specifies the CEC interrupt to enable. + * This parameter can be one of the following values: + * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable + * @arg CEC_IT_TXERR: Tx Error IT Enable + * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable + * @arg CEC_IT_TXEND: End of transmission IT Enable + * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable + * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable + * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable + * @arg CEC_IT_LBPE: Rx Long period Error IT Enable + * @arg CEC_IT_SBPE: Rx Short period Error IT Enable + * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable + * @arg CEC_IT_RXOVR: Rx Overrun IT Enable + * @arg CEC_IT_RXEND: End Of Reception IT Enable + * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable + * @retval none + */ +#define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__)) + +/** @brief Disables the specified CEC interrupt. + * @param __HANDLE__: specifies the CEC Handle. + * @param __INTERRUPT__: specifies the CEC interrupt to disable. + * This parameter can be one of the following values: + * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable + * @arg CEC_IT_TXERR: Tx Error IT Enable + * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable + * @arg CEC_IT_TXEND: End of transmission IT Enable + * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable + * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable + * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable + * @arg CEC_IT_LBPE: Rx Long period Error IT Enable + * @arg CEC_IT_SBPE: Rx Short period Error IT Enable + * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable + * @arg CEC_IT_RXOVR: Rx Overrun IT Enable + * @arg CEC_IT_RXEND: End Of Reception IT Enable + * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable + * @retval none + */ +#define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__))) + +/** @brief Checks whether or not the specified CEC interrupt is enabled. + * @param __HANDLE__: specifies the CEC Handle. + * @param __INTERRUPT__: specifies the CEC interrupt to check. + * This parameter can be one of the following values: + * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable + * @arg CEC_IT_TXERR: Tx Error IT Enable + * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable + * @arg CEC_IT_TXEND: End of transmission IT Enable + * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable + * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable + * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable + * @arg CEC_IT_LBPE: Rx Long period Error IT Enable + * @arg CEC_IT_SBPE: Rx Short period Error IT Enable + * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable + * @arg CEC_IT_RXOVR: Rx Overrun IT Enable + * @arg CEC_IT_RXEND: End Of Reception IT Enable + * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable + * @retval FlagStatus + */ +#define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__)) + +/** @brief Enables the CEC device + * @param __HANDLE__: specifies the CEC Handle. + * @retval none + */ +#define __HAL_CEC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_CECEN) + +/** @brief Disables the CEC device + * @param __HANDLE__: specifies the CEC Handle. + * @retval none + */ +#define __HAL_CEC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CEC_CR_CECEN) + +/** @brief Set Transmission Start flag + * @param __HANDLE__: specifies the CEC Handle. + * @retval none + */ +#define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXSOM) + +/** @brief Set Transmission End flag + * @param __HANDLE__: specifies the CEC Handle. + * @retval none + * If the CEC message consists of only one byte, TXEOM must be set before of TXSOM. + */ +#define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXEOM) + +/** @brief Get Transmission Start flag + * @param __HANDLE__: specifies the CEC Handle. + * @retval FlagStatus + */ +#define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXSOM) + +/** @brief Get Transmission End flag + * @param __HANDLE__: specifies the CEC Handle. + * @retval FlagStatus + */ +#define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXEOM) + +/** @brief Clear OAR register + * @param __HANDLE__: specifies the CEC Handle. + * @retval none + */ +#define __HAL_CEC_CLEAR_OAR(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_OAR) + +/** @brief Set OAR register (without resetting previously set address in case of multi-address mode) + * To reset OAR, __HAL_CEC_CLEAR_OAR() needs to be called beforehand + * @param __HANDLE__: specifies the CEC Handle. + * @param __ADDRESS__: Own Address value (CEC logical address is identified by bit position) + * @retval none + */ +#define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__) SET_BIT((__HANDLE__)->Instance->CFGR, (__ADDRESS__)<< CEC_CFGR_OAR_LSB_POS) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup CEC_Exported_Functions + * @{ + */ + +/** @addtogroup CEC_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec); +HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec); +HAL_StatusTypeDef HAL_CEC_SetDeviceAddress(CEC_HandleTypeDef *hcec, uint16_t CEC_OwnAddress); +void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec); +void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec); +/** + * @} + */ + +/** @addtogroup CEC_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions ***************************************************/ +HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t InitiatorAddress,uint8_t DestinationAddress, uint8_t *pData, uint32_t Size); +uint32_t HAL_CEC_GetLastReceivedFrameSize(CEC_HandleTypeDef *hcec); +void HAL_CEC_ChangeRxBuffer(CEC_HandleTypeDef *hcec, uint8_t* Rxbuffer); +void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec); +void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec); +void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec, uint32_t RxFrameSize); +void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec); +/** + * @} + */ + +/** @addtogroup CEC_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State functions ************************************************/ +HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec); +uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup CEC_Private_Types CEC Private Types + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup CEC_Private_Variables CEC Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup CEC_Private_Constants CEC Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup CEC_Private_Macros CEC Private Macros + * @{ + */ + +#define IS_CEC_SIGNALFREETIME(__SFT__) ((__SFT__) <= CEC_CFGR_SFT) + +#define IS_CEC_TOLERANCE(__RXTOL__) (((__RXTOL__) == CEC_STANDARD_TOLERANCE) || \ + ((__RXTOL__) == CEC_EXTENDED_TOLERANCE)) + +#define IS_CEC_BRERXSTOP(__BRERXSTOP__) (((__BRERXSTOP__) == CEC_NO_RX_STOP_ON_BRE) || \ + ((__BRERXSTOP__) == CEC_RX_STOP_ON_BRE)) + +#define IS_CEC_BREERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_NO_GENERATION) || \ + ((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_GENERATION)) + +#define IS_CEC_LBPEERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_NO_GENERATION) || \ + ((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_GENERATION)) + +#define IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BROADCASTERROR_ERRORBIT_GENERATION) || \ + ((__ERRORBITGEN__) == CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION)) + +#define IS_CEC_SFTOP(__SFTOP__) (((__SFTOP__) == CEC_SFT_START_ON_TXSOM) || \ + ((__SFTOP__) == CEC_SFT_START_ON_TX_RX_END)) + +#define IS_CEC_LISTENING_MODE(__MODE__) (((__MODE__) == CEC_REDUCED_LISTENING_MODE) || \ + ((__MODE__) == CEC_FULL_LISTENING_MODE)) + +/** @brief Check CEC message size. + * The message size is the payload size: without counting the header, + * it varies from 0 byte (ping operation, one header only, no payload) to + * 15 bytes (1 opcode and up to 14 operands following the header). + * @param __SIZE__: CEC message size. + * @retval Test result (TRUE or FALSE). + */ +#define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0x10) + +/** @brief Check CEC device Own Address Register (OAR) setting. + * OAR address is written in a 15-bit field within CEC_CFGR register. + * @param __ADDRESS__: CEC own address. + * @retval Test result (TRUE or FALSE). + */ +#define IS_CEC_OWN_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x7FFF) + +/** @brief Check CEC initiator or destination logical address setting. + * Initiator and destination addresses are coded over 4 bits. + * @param __ADDRESS__: CEC initiator or logical address. + * @retval Test result (TRUE or FALSE). + */ +#define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0xF) +/** + * @} + */ +/* Private functions ---------------------------------------------------------*/ +/** @defgroup CEC_Private_Functions CEC Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* CEC */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F7xx_HAL_CEC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/35529b95/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_conf_template.h ---------------------------------------------------------------------- diff --git a/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_conf_template.h b/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_conf_template.h new file mode 100644 index 0000000..da42733 --- /dev/null +++ b/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_conf_template.h @@ -0,0 +1,464 @@ +/** + ****************************************************************************** + * @file stm32f7xx_hal_conf_template.h + * @author MCD Application Team + * @version V1.2.0 + * @date 30-December-2016 + * @brief HAL configuration template file. + * This file should be copied to the application folder and renamed + * to stm32f7xx_hal_conf.h. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F7xx_HAL_CONF_H +#define __STM32F7xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +#define HAL_CAN_MODULE_ENABLED +#define HAL_CEC_MODULE_ENABLED +#define HAL_CRC_MODULE_ENABLED +#define HAL_CRYP_MODULE_ENABLED +#define HAL_DAC_MODULE_ENABLED +#define HAL_DCMI_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_DMA2D_MODULE_ENABLED +#define HAL_ETH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_NAND_MODULE_ENABLED +#define HAL_NOR_MODULE_ENABLED +#define HAL_SRAM_MODULE_ENABLED +#define HAL_SDRAM_MODULE_ENABLED +#define HAL_HASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_I2S_MODULE_ENABLED +#define HAL_IWDG_MODULE_ENABLED +#define HAL_LPTIM_MODULE_ENABLED +#define HAL_LTDC_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_QSPI_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_RNG_MODULE_ENABLED +#define HAL_RTC_MODULE_ENABLED +#define HAL_SAI_MODULE_ENABLED +#define HAL_SD_MODULE_ENABLED +#define HAL_SPDIFRX_MODULE_ENABLED +#define HAL_SPI_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +#define HAL_USART_MODULE_ENABLED +#define HAL_IRDA_MODULE_ENABLED +#define HAL_SMARTCARD_MODULE_ENABLED +#define HAL_WWDG_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_PCD_MODULE_ENABLED +#define HAL_HCD_MODULE_ENABLED +#define HAL_DFSDM_MODULE_ENABLED +#define HAL_DSI_MODULE_ENABLED +#define HAL_JPEG_MODULE_ENABLED +#define HAL_MDIOS_MODULE_ENABLED +#define HAL_SMBUS_MODULE_ENABLED +#define HAL_MMC_MODULE_ENABLED + + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE 25000000U /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the Internal oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE 3300U /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY 0x0FU /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define ART_ACCLERATOR_ENABLE 1U /* To enable instruction cache and prefetch */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* DP83848 PHY Address*/ +#define DP83848_PHY_ADDRESS 0x01U +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY 0x000000FFU +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY 0x00000FFFU + +#define PHY_READ_TO 0x0000FFFFU +#define PHY_WRITE_TO 0x0000FFFFU + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x00U) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x01U) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ +#define PHY_MICR ((uint16_t)0x11U) /*!< MII Interrupt Control Register */ +#define PHY_MISR ((uint16_t)0x12U) /*!< MII Interrupt Status and Misc. Control Register */ + +#define PHY_LINK_STATUS ((uint16_t)0x0001U) /*!< PHY Link mask */ +#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ + +#define PHY_MICR_INT_EN ((uint16_t)0x0002U) /*!< PHY Enable interrupts */ +#define PHY_MICR_INT_OE ((uint16_t)0x0001U) /*!< PHY Enable output interrupt events */ + +#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020U) /*!< Enable Interrupt on change of link status */ +#define PHY_LINK_INTERRUPT ((uint16_t)0x2000U) /*!< PHY link status interrupt mask */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f7xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f7xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f7xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f7xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f7xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f7xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f7xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f7xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f7xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f7xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f7xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f7xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f7xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f7xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f7xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f7xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f7xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f7xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f7xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f7xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f7xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f7xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f7xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f7xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f7xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f7xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f7xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f7xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f7xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f7xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f7xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f7xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f7xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f7xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f7xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f7xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f7xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f7xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32f7xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32f7xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_JPEG_MODULE_ENABLED + #include "stm32f7xx_hal_jpeg.h" +#endif /* HAL_JPEG_MODULE_ENABLED */ + +#ifdef HAL_MDIOS_MODULE_ENABLED + #include "stm32f7xx_hal_mdios.h" +#endif /* HAL_MDIOS_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32f7xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32f7xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0) +#endif /* USE_FULL_ASSERT */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F7xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ http://git-wip-us.apache.org/repos/asf/incubator-mynewt-core/blob/35529b95/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h ---------------------------------------------------------------------- diff --git a/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h b/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h new file mode 100644 index 0000000..4b5f82c --- /dev/null +++ b/hw/mcu/stm/stm32f7xx/src/ext/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h @@ -0,0 +1,424 @@ +/** + ****************************************************************************** + * @file stm32f7xx_hal_cortex.h + * @author MCD Application Team + * @version V1.2.0 + * @date 30-December-2016 + * @brief Header file of CORTEX HAL module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F7xx_HAL_CORTEX_H +#define __STM32F7xx_HAL_CORTEX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f7xx_hal_def.h" + +/** @addtogroup STM32F7xx_HAL_Driver + * @{ + */ + +/** @addtogroup CORTEX + * @{ + */ +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Types Cortex Exported Types + * @{ + */ + +#if (__MPU_PRESENT == 1) +/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition + * @brief MPU Region initialization structure + * @{ + */ +typedef struct +{ + uint8_t Enable; /*!< Specifies the status of the region. + This parameter can be a value of @ref CORTEX_MPU_Region_Enable */ + uint8_t Number; /*!< Specifies the number of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Number */ + uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */ + uint8_t Size; /*!< Specifies the size of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Size */ + uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + uint8_t TypeExtField; /*!< Specifies the TEX field level. + This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */ + uint8_t AccessPermission; /*!< Specifies the region access permission type. + This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */ + uint8_t DisableExec; /*!< Specifies the instruction access status. + This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */ + uint8_t IsShareable; /*!< Specifies the shareability status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */ + uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected. + This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */ + uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */ +}MPU_Region_InitTypeDef; +/** + * @} + */ +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants + * @{ + */ + +/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group + * @{ + */ +#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007U) /*!< 0 bits for pre-emption priority + 4 bits for subpriority */ +#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006U) /*!< 1 bits for pre-emption priority + 3 bits for subpriority */ +#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005U) /*!< 2 bits for pre-emption priority + 2 bits for subpriority */ +#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004U) /*!< 3 bits for pre-emption priority + 1 bits for subpriority */ +#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003U) /*!< 4 bits for pre-emption priority + 0 bits for subpriority */ +/** + * @} + */ + +/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source + * @{ + */ +#define SYSTICK_CLKSOURCE_HCLK_DIV8 ((uint32_t)0x00000000U) +#define SYSTICK_CLKSOURCE_HCLK ((uint32_t)0x00000004U) + +/** + * @} + */ + +#if (__MPU_PRESENT == 1) +/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control + * @{ + */ +#define MPU_HFNMI_PRIVDEF_NONE ((uint32_t)0x00000000U) +#define MPU_HARDFAULT_NMI ((uint32_t)0x00000002U) +#define MPU_PRIVILEGED_DEFAULT ((uint32_t)0x00000004U) +#define MPU_HFNMI_PRIVDEF ((uint32_t)0x00000006U) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable + * @{ + */ +#define MPU_REGION_ENABLE ((uint8_t)0x01U) +#define MPU_REGION_DISABLE ((uint8_t)0x00U) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access + * @{ + */ +#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00U) +#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01U) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable + * @{ + */ +#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01U) +#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00U) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable + * @{ + */ +#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01U) +#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00U) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable + * @{ + */ +#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01U) +#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00U) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels + * @{ + */ +#define MPU_TEX_LEVEL0 ((uint8_t)0x00U) +#define MPU_TEX_LEVEL1 ((uint8_t)0x01U) +#define MPU_TEX_LEVEL2 ((uint8_t)0x02U) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size + * @{ + */ +#define MPU_REGION_SIZE_32B ((uint8_t)0x04U) +#define MPU_REGION_SIZE_64B ((uint8_t)0x05U) +#define MPU_REGION_SIZE_128B ((uint8_t)0x06U) +#define MPU_REGION_SIZE_256B ((uint8_t)0x07U) +#define MPU_REGION_SIZE_512B ((uint8_t)0x08U) +#define MPU_REGION_SIZE_1KB ((uint8_t)0x09U) +#define MPU_REGION_SIZE_2KB ((uint8_t)0x0AU) +#define MPU_REGION_SIZE_4KB ((uint8_t)0x0BU) +#define MPU_REGION_SIZE_8KB ((uint8_t)0x0CU) +#define MPU_REGION_SIZE_16KB ((uint8_t)0x0DU) +#define MPU_REGION_SIZE_32KB ((uint8_t)0x0EU) +#define MPU_REGION_SIZE_64KB ((uint8_t)0x0FU) +#define MPU_REGION_SIZE_128KB ((uint8_t)0x10U) +#define MPU_REGION_SIZE_256KB ((uint8_t)0x11U) +#define MPU_REGION_SIZE_512KB ((uint8_t)0x12U) +#define MPU_REGION_SIZE_1MB ((uint8_t)0x13U) +#define MPU_REGION_SIZE_2MB ((uint8_t)0x14U) +#define MPU_REGION_SIZE_4MB ((uint8_t)0x15U) +#define MPU_REGION_SIZE_8MB ((uint8_t)0x16U) +#define MPU_REGION_SIZE_16MB ((uint8_t)0x17U) +#define MPU_REGION_SIZE_32MB ((uint8_t)0x18U) +#define MPU_REGION_SIZE_64MB ((uint8_t)0x19U) +#define MPU_REGION_SIZE_128MB ((uint8_t)0x1AU) +#define MPU_REGION_SIZE_256MB ((uint8_t)0x1BU) +#define MPU_REGION_SIZE_512MB ((uint8_t)0x1CU) +#define MPU_REGION_SIZE_1GB ((uint8_t)0x1DU) +#define MPU_REGION_SIZE_2GB ((uint8_t)0x1EU) +#define MPU_REGION_SIZE_4GB ((uint8_t)0x1FU) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes + * @{ + */ +#define MPU_REGION_NO_ACCESS ((uint8_t)0x00U) +#define MPU_REGION_PRIV_RW ((uint8_t)0x01U) +#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02U) +#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03U) +#define MPU_REGION_PRIV_RO ((uint8_t)0x05U) +#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06U) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number + * @{ + */ +#define MPU_REGION_NUMBER0 ((uint8_t)0x00U) +#define MPU_REGION_NUMBER1 ((uint8_t)0x01U) +#define MPU_REGION_NUMBER2 ((uint8_t)0x02U) +#define MPU_REGION_NUMBER3 ((uint8_t)0x03U) +#define MPU_REGION_NUMBER4 ((uint8_t)0x04U) +#define MPU_REGION_NUMBER5 ((uint8_t)0x05U) +#define MPU_REGION_NUMBER6 ((uint8_t)0x06U) +#define MPU_REGION_NUMBER7 ((uint8_t)0x07U) +/** + * @} + */ +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + + +/* Exported Macros -----------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup CORTEX_Exported_Functions + * @{ + */ + +/** @addtogroup CORTEX_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup); +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority); +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn); +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn); +void HAL_NVIC_SystemReset(void); +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb); +/** + * @} + */ + +/** @addtogroup CORTEX_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +#if (__MPU_PRESENT == 1) +void HAL_MPU_Enable(uint32_t MPU_Control); +void HAL_MPU_Disable(void); +void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init); +#endif /* __MPU_PRESENT */ +uint32_t HAL_NVIC_GetPriorityGrouping(void); +void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority); +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn); +uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn); +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource); +void HAL_SYSTICK_IRQHandler(void); +void HAL_SYSTICK_Callback(void); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup CORTEX_Private_Macros CORTEX Private Macros + * @{ + */ +#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \ + ((GROUP) == NVIC_PRIORITYGROUP_1) || \ + ((GROUP) == NVIC_PRIORITYGROUP_2) || \ + ((GROUP) == NVIC_PRIORITYGROUP_3) || \ + ((GROUP) == NVIC_PRIORITYGROUP_4)) + +#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U) + +#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U) + +#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= 0x00) + +#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \ + ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8)) + +#if (__MPU_PRESENT == 1) +#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \ + ((STATE) == MPU_REGION_DISABLE)) + +#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \ + ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE)) + +#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \ + ((STATE) == MPU_ACCESS_NOT_SHAREABLE)) + +#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \ + ((STATE) == MPU_ACCESS_NOT_CACHEABLE)) + +#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \ + ((STATE) == MPU_ACCESS_NOT_BUFFERABLE)) + +#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \ + ((TYPE) == MPU_TEX_LEVEL1) || \ + ((TYPE) == MPU_TEX_LEVEL2)) + +#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RW) || \ + ((TYPE) == MPU_REGION_PRIV_RW_URO) || \ + ((TYPE) == MPU_REGION_FULL_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RO) || \ + ((TYPE) == MPU_REGION_PRIV_RO_URO)) + +#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \ + ((NUMBER) == MPU_REGION_NUMBER1) || \ + ((NUMBER) == MPU_REGION_NUMBER2) || \ + ((NUMBER) == MPU_REGION_NUMBER3) || \ + ((NUMBER) == MPU_REGION_NUMBER4) || \ + ((NUMBER) == MPU_REGION_NUMBER5) || \ + ((NUMBER) == MPU_REGION_NUMBER6) || \ + ((NUMBER) == MPU_REGION_NUMBER7)) + +#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \ + ((SIZE) == MPU_REGION_SIZE_64B) || \ + ((SIZE) == MPU_REGION_SIZE_128B) || \ + ((SIZE) == MPU_REGION_SIZE_256B) || \ + ((SIZE) == MPU_REGION_SIZE_512B) || \ + ((SIZE) == MPU_REGION_SIZE_1KB) || \ + ((SIZE) == MPU_REGION_SIZE_2KB) || \ + ((SIZE) == MPU_REGION_SIZE_4KB) || \ + ((SIZE) == MPU_REGION_SIZE_8KB) || \ + ((SIZE) == MPU_REGION_SIZE_16KB) || \ + ((SIZE) == MPU_REGION_SIZE_32KB) || \ + ((SIZE) == MPU_REGION_SIZE_64KB) || \ + ((SIZE) == MPU_REGION_SIZE_128KB) || \ + ((SIZE) == MPU_REGION_SIZE_256KB) || \ + ((SIZE) == MPU_REGION_SIZE_512KB) || \ + ((SIZE) == MPU_REGION_SIZE_1MB) || \ + ((SIZE) == MPU_REGION_SIZE_2MB) || \ + ((SIZE) == MPU_REGION_SIZE_4MB) || \ + ((SIZE) == MPU_REGION_SIZE_8MB) || \ + ((SIZE) == MPU_REGION_SIZE_16MB) || \ + ((SIZE) == MPU_REGION_SIZE_32MB) || \ + ((SIZE) == MPU_REGION_SIZE_64MB) || \ + ((SIZE) == MPU_REGION_SIZE_128MB) || \ + ((SIZE) == MPU_REGION_SIZE_256MB) || \ + ((SIZE) == MPU_REGION_SIZE_512MB) || \ + ((SIZE) == MPU_REGION_SIZE_1GB) || \ + ((SIZE) == MPU_REGION_SIZE_2GB) || \ + ((SIZE) == MPU_REGION_SIZE_4GB)) + +#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FFU) +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F7xx_HAL_CORTEX_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/