This is an automated email from the ASF dual-hosted git repository. acassis pushed a commit to branch master in repository https://gitbox.apache.org/repos/asf/nuttx.git
commit ad97a98b87deb7baddd91f2dfe3823a5f1a68afe Author: wangjianyu3 <[email protected]> AuthorDate: Mon Aug 24 23:29:06 2026 +0800 boards/esp32s3-lcd-ev: switch defconfigs to nxinit entrypoint Switch all esp32s3-lcd-ev defconfigs (audio, buttons, lcd, lvgl, nsh, ws2812) from nsh_main to nxinit (init_main) as the system init entry point, matching the lckfb-szpi-esp32s3 board's existing nxinit configs (see 73c949c87e5a) for consistency across esp32s3 boards. For each defconfig: - CONFIG_INIT_ENTRYPOINT switched to "init_main" - CONFIG_INIT_STACKSIZE set to 8192. Measured on lckfb-szpi-esp32s3 with CONFIG_STACK_COLORATION=y on the worst case available: a config whose init.rc starts two services (console sh + adbd). At the 2048 Kconfig default the board panics at runtime (xtensa_user_panic, task "sh"); at 4096 init_main reaches FILLED=99.5%, i.e. no headroom; at 8192 it settles at USED=4336 (53.6%). A single-service config only fills 46.9% of a 3072-byte init stack, so 8192 is deliberately uniform rather than minimal: it covers the two-service worst case with roughly 2x margin and keeps every defconfig off the 2048 default, where the init stack overflows and clobbers the global inode/mount tree - the procfs mount disappears, "ls /" crashes in read_pseudodir and "ps" reports "/proc not mounted". - CONFIG_SYSTEM_NXINIT=y added, plus its direct Kconfig dependencies (CONFIG_EXPERIMENTAL, CONFIG_LIBC_EXECFUNCS, CONFIG_SCHED_CHILD_STATUS, which depends on CONFIG_SCHED_HAVE_PARENT) - CONFIG_SYSTEM_NSH_STACKSIZE=8192 added: nsh now runs as a service spawned by init.rc instead of being init itself, so the shell workload is carried by its own stack rather than the init stack. Without this it falls back to CONFIG_DEFAULT_TASK_STACKSIZE (2048 unless the defconfig overrides it) and crashes in getumask while running "ps", too small to reach the procfs read path. - ETC_ROMFS/FS_ROMFS added where missing, needed to ship init.rc via the board's ROMFS nsh continues to run as a console service started by init.rc (boards/xtensa/esp32s3/common/src/etc/init.d/init.rc), not as the top-level init. Verified all 6 defconfigs (audio, buttons, lcd, lvgl, nsh, ws2812) build cleanly with make. Runtime behavior (init_main spawning nsh as a console service) was confirmed on lckfb-szpi-esp32s3 hardware, which shares the same nxinit/init.rc mechanism; this board has no hardware attached for a flash/boot pass in this session, so the build-verified defconfigs are the extent of local testing here. Assisted-by: Kiro:claude-sonnet-5 Assisted-by: Kiro:claude-opus-5 Signed-off-by: wangjianyu3 <[email protected]> --- boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/audio/defconfig | 12 ++++++++++-- .../xtensa/esp32s3/esp32s3-lcd-ev/configs/buttons/defconfig | 11 ++++++++++- boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/lcd/defconfig | 12 ++++++++++-- boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/lvgl/defconfig | 12 ++++++++++-- boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/nsh/defconfig | 12 ++++++++++-- .../xtensa/esp32s3/esp32s3-lcd-ev/configs/ws2812/defconfig | 12 ++++++++++-- 6 files changed, 60 insertions(+), 11 deletions(-) diff --git a/boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/audio/defconfig b/boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/audio/defconfig index 0d46dba9713..9c0095b7db2 100644 --- a/boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/audio/defconfig +++ b/boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/audio/defconfig @@ -51,19 +51,23 @@ CONFIG_ESPRESSIF_I2S0_MCLK=y CONFIG_ESPRESSIF_I2S0_MCLKPIN=16 CONFIG_ESPRESSIF_I2S0_WSPIN=45 CONFIG_ESPRESSIF_WIFI=y +CONFIG_ETC_ROMFS=y CONFIG_EXAMPLES_RANDOM=y +CONFIG_EXPERIMENTAL=y CONFIG_FS_PROCFS=y +CONFIG_FS_ROMFS=y CONFIG_HAVE_CXX=y CONFIG_HAVE_CXXINITIALIZE=y CONFIG_I2S_DMADESC_NUM=4 CONFIG_IDLETHREAD_STACKSIZE=3072 -CONFIG_INIT_ENTRYPOINT="nsh_main" -CONFIG_INIT_STACKSIZE=3072 +CONFIG_INIT_ENTRYPOINT="init_main" +CONFIG_INIT_STACKSIZE=8192 CONFIG_INTELHEX_BINARY=y CONFIG_IOB_BUFSIZE=400 CONFIG_IOB_NBUFFERS=100 CONFIG_IOB_NCHAINS=32 CONFIG_IOB_THROTTLE=40 +CONFIG_LIBC_EXECFUNCS=y CONFIG_LINE_MAX=64 CONFIG_NETDB_DNSCLIENT=y CONFIG_NETDEV_LATEINIT=y @@ -91,6 +95,8 @@ CONFIG_RAM_START=0x20000000 CONFIG_RR_INTERVAL=200 CONFIG_RTC=y CONFIG_RTC_DRIVER=y +CONFIG_SCHED_CHILD_STATUS=y +CONFIG_SCHED_HAVE_PARENT=y CONFIG_SCHED_LPWORK=y CONFIG_SCHED_WAITPID=y CONFIG_SMP=y @@ -102,6 +108,8 @@ CONFIG_START_YEAR=2011 CONFIG_SYSLOG_BUFFER=y CONFIG_SYSTEM_DHCPC_RENEW=y CONFIG_SYSTEM_NSH=y +CONFIG_SYSTEM_NSH_STACKSIZE=8192 +CONFIG_SYSTEM_NXINIT=y CONFIG_SYSTEM_NXPLAYER=y CONFIG_SYSTEM_PING=y CONFIG_TIMER=y diff --git a/boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/buttons/defconfig b/boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/buttons/defconfig index 8c4639d4a90..7abedd33690 100644 --- a/boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/buttons/defconfig +++ b/boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/buttons/defconfig @@ -29,19 +29,24 @@ CONFIG_DEBUG_FULLOPT=y CONFIG_DEBUG_SYMBOLS=y CONFIG_ESP32S3_GPIO_IRQ=y CONFIG_ESP32S3_UART0=y +CONFIG_ETC_ROMFS=y CONFIG_EXAMPLES_BUTTONS=y CONFIG_EXAMPLES_BUTTONS_NAME0="BOOT" CONFIG_EXAMPLES_BUTTONS_NAMES=y CONFIG_EXAMPLES_BUTTONS_QTD=1 +CONFIG_EXPERIMENTAL=y CONFIG_FS_PROCFS=y +CONFIG_FS_ROMFS=y CONFIG_HAVE_CXX=y CONFIG_HAVE_CXXINITIALIZE=y CONFIG_IDLETHREAD_STACKSIZE=3072 -CONFIG_INIT_ENTRYPOINT="nsh_main" +CONFIG_INIT_ENTRYPOINT="init_main" +CONFIG_INIT_STACKSIZE=8192 CONFIG_INPUT=y CONFIG_INPUT_BUTTONS=y CONFIG_INPUT_BUTTONS_LOWER=y CONFIG_INTELHEX_BINARY=y +CONFIG_LIBC_EXECFUNCS=y CONFIG_LINE_MAX=64 CONFIG_NSH_BUILTIN_APPS=y CONFIG_NSH_FILEIOSIZE=512 @@ -50,10 +55,14 @@ CONFIG_PREALLOC_TIMERS=4 CONFIG_RAM_SIZE=114688 CONFIG_RAM_START=0x20000000 CONFIG_RR_INTERVAL=200 +CONFIG_SCHED_CHILD_STATUS=y +CONFIG_SCHED_HAVE_PARENT=y CONFIG_SCHED_WAITPID=y CONFIG_START_DAY=6 CONFIG_START_MONTH=12 CONFIG_START_YEAR=2011 CONFIG_SYSLOG_BUFFER=y CONFIG_SYSTEM_NSH=y +CONFIG_SYSTEM_NSH_STACKSIZE=8192 +CONFIG_SYSTEM_NXINIT=y CONFIG_UART0_SERIAL_CONSOLE=y diff --git a/boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/lcd/defconfig b/boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/lcd/defconfig index 38c963e64c0..4426de5e835 100644 --- a/boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/lcd/defconfig +++ b/boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/lcd/defconfig @@ -36,14 +36,18 @@ CONFIG_ESP32S3_SPIRAM=y CONFIG_ESP32S3_SPIRAM_MODE_OCT=y CONFIG_ESP32S3_SPIRAM_SPEED_80M=y CONFIG_ESP32S3_UART0=y +CONFIG_ETC_ROMFS=y CONFIG_EXAMPLES_FB=y +CONFIG_EXPERIMENTAL=y CONFIG_FS_PROCFS=y +CONFIG_FS_ROMFS=y CONFIG_HAVE_CXX=y CONFIG_HAVE_CXXINITIALIZE=y CONFIG_IDLETHREAD_STACKSIZE=3072 -CONFIG_INIT_ENTRYPOINT="nsh_main" -CONFIG_INIT_STACKSIZE=3072 +CONFIG_INIT_ENTRYPOINT="init_main" +CONFIG_INIT_STACKSIZE=8192 CONFIG_INTELHEX_BINARY=y +CONFIG_LIBC_EXECFUNCS=y CONFIG_LINE_MAX=64 CONFIG_MM_REGIONS=2 CONFIG_NDEBUG=y @@ -54,10 +58,14 @@ CONFIG_PREALLOC_TIMERS=4 CONFIG_RAM_SIZE=114688 CONFIG_RAM_START=0x20000000 CONFIG_RR_INTERVAL=200 +CONFIG_SCHED_CHILD_STATUS=y +CONFIG_SCHED_HAVE_PARENT=y CONFIG_SCHED_WAITPID=y CONFIG_START_DAY=6 CONFIG_START_MONTH=12 CONFIG_START_YEAR=2011 CONFIG_SYSLOG_BUFFER=y CONFIG_SYSTEM_NSH=y +CONFIG_SYSTEM_NSH_STACKSIZE=8192 +CONFIG_SYSTEM_NXINIT=y CONFIG_UART0_SERIAL_CONSOLE=y diff --git a/boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/lvgl/defconfig b/boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/lvgl/defconfig index 650102ce1ab..e11d42eb483 100644 --- a/boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/lvgl/defconfig +++ b/boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/lvgl/defconfig @@ -37,19 +37,23 @@ CONFIG_ESP32S3_SPIRAM=y CONFIG_ESP32S3_SPIRAM_MODE_OCT=y CONFIG_ESP32S3_SPIRAM_SPEED_80M=y CONFIG_ESP32S3_UART0=y +CONFIG_ETC_ROMFS=y CONFIG_EXAMPLES_LVGLDEMO=y +CONFIG_EXPERIMENTAL=y CONFIG_FS_PROCFS=y +CONFIG_FS_ROMFS=y CONFIG_FT5X06_POLLMODE=y CONFIG_FT5X06_SINGLEPOINT=y CONFIG_GRAPHICS_LVGL=y CONFIG_HAVE_CXX=y CONFIG_HAVE_CXXINITIALIZE=y CONFIG_IDLETHREAD_STACKSIZE=3072 -CONFIG_INIT_ENTRYPOINT="nsh_main" -CONFIG_INIT_STACKSIZE=3072 +CONFIG_INIT_ENTRYPOINT="init_main" +CONFIG_INIT_STACKSIZE=8192 CONFIG_INPUT=y CONFIG_INPUT_FT5X06=y CONFIG_INTELHEX_BINARY=y +CONFIG_LIBC_EXECFUNCS=y CONFIG_LINE_MAX=64 CONFIG_LV_FONT_MONTSERRAT_20=y CONFIG_LV_USE_CLIB_MALLOC=y @@ -67,6 +71,8 @@ CONFIG_PREALLOC_TIMERS=4 CONFIG_RAM_SIZE=114688 CONFIG_RAM_START=0x20000000 CONFIG_RR_INTERVAL=200 +CONFIG_SCHED_CHILD_STATUS=y +CONFIG_SCHED_HAVE_PARENT=y CONFIG_SCHED_LPWORK=y CONFIG_SCHED_WAITPID=y CONFIG_START_DAY=6 @@ -74,4 +80,6 @@ CONFIG_START_MONTH=12 CONFIG_START_YEAR=2011 CONFIG_SYSLOG_BUFFER=y CONFIG_SYSTEM_NSH=y +CONFIG_SYSTEM_NSH_STACKSIZE=8192 +CONFIG_SYSTEM_NXINIT=y CONFIG_UART0_SERIAL_CONSOLE=y diff --git a/boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/nsh/defconfig b/boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/nsh/defconfig index 0c726545e5b..91407a138f1 100644 --- a/boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/nsh/defconfig +++ b/boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/nsh/defconfig @@ -26,13 +26,17 @@ CONFIG_BUILTIN=y CONFIG_DEBUG_FULLOPT=y CONFIG_DEBUG_SYMBOLS=y CONFIG_ESP32S3_UART0=y +CONFIG_ETC_ROMFS=y +CONFIG_EXPERIMENTAL=y CONFIG_FS_PROCFS=y +CONFIG_FS_ROMFS=y CONFIG_HAVE_CXX=y CONFIG_HAVE_CXXINITIALIZE=y CONFIG_IDLETHREAD_STACKSIZE=3072 -CONFIG_INIT_ENTRYPOINT="nsh_main" -CONFIG_INIT_STACKSIZE=3072 +CONFIG_INIT_ENTRYPOINT="init_main" +CONFIG_INIT_STACKSIZE=8192 CONFIG_INTELHEX_BINARY=y +CONFIG_LIBC_EXECFUNCS=y CONFIG_LINE_MAX=64 CONFIG_NSH_BUILTIN_APPS=y CONFIG_NSH_FILEIOSIZE=512 @@ -41,10 +45,14 @@ CONFIG_PREALLOC_TIMERS=4 CONFIG_RAM_SIZE=114688 CONFIG_RAM_START=0x20000000 CONFIG_RR_INTERVAL=200 +CONFIG_SCHED_CHILD_STATUS=y +CONFIG_SCHED_HAVE_PARENT=y CONFIG_SCHED_WAITPID=y CONFIG_START_DAY=6 CONFIG_START_MONTH=12 CONFIG_START_YEAR=2011 CONFIG_SYSLOG_BUFFER=y CONFIG_SYSTEM_NSH=y +CONFIG_SYSTEM_NSH_STACKSIZE=8192 +CONFIG_SYSTEM_NXINIT=y CONFIG_UART0_SERIAL_CONSOLE=y diff --git a/boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/ws2812/defconfig b/boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/ws2812/defconfig index cb1dd6156ad..9732b8c5447 100644 --- a/boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/ws2812/defconfig +++ b/boards/xtensa/esp32s3/esp32s3-lcd-ev/configs/ws2812/defconfig @@ -28,14 +28,18 @@ CONFIG_DEBUG_SYMBOLS=y CONFIG_ESP32S3_SPI2=y CONFIG_ESP32S3_SPI2_MOSIPIN=4 CONFIG_ESP32S3_UART0=y +CONFIG_ETC_ROMFS=y CONFIG_EXAMPLES_WS2812=y +CONFIG_EXPERIMENTAL=y CONFIG_FS_PROCFS=y +CONFIG_FS_ROMFS=y CONFIG_HAVE_CXX=y CONFIG_HAVE_CXXINITIALIZE=y CONFIG_IDLETHREAD_STACKSIZE=3072 -CONFIG_INIT_ENTRYPOINT="nsh_main" -CONFIG_INIT_STACKSIZE=3072 +CONFIG_INIT_ENTRYPOINT="init_main" +CONFIG_INIT_STACKSIZE=8192 CONFIG_INTELHEX_BINARY=y +CONFIG_LIBC_EXECFUNCS=y CONFIG_LINE_MAX=64 CONFIG_NSH_BUILTIN_APPS=y CONFIG_NSH_FILEIOSIZE=512 @@ -44,12 +48,16 @@ CONFIG_PREALLOC_TIMERS=4 CONFIG_RAM_SIZE=114688 CONFIG_RAM_START=0x20000000 CONFIG_RR_INTERVAL=200 +CONFIG_SCHED_CHILD_STATUS=y +CONFIG_SCHED_HAVE_PARENT=y CONFIG_SCHED_WAITPID=y CONFIG_START_DAY=6 CONFIG_START_MONTH=12 CONFIG_START_YEAR=2011 CONFIG_SYSLOG_BUFFER=y CONFIG_SYSTEM_NSH=y +CONFIG_SYSTEM_NSH_STACKSIZE=8192 +CONFIG_SYSTEM_NXINIT=y CONFIG_UART0_SERIAL_CONSOLE=y CONFIG_WS2812=y CONFIG_WS2812_FREQUENCY=8000000
