After updating and upgrading i now get exactly the same error as when i specified -Dwext, so something is wrong something still :/
anyone got any ideas? regards Kristoffer flexd skrev: > This is not working (adding -Dwext) i only get additional errors then: > > ioctl[SIOCSIWENCODEEXT]: Operation not supported > ioctl[SIOCSIWENCODE]: Input/output error > ioctl[SIOCSIWENCODEEXT]: Operation not supported > ioctl[SIOCSIWENCODE]: Input/output error > ioctl[SIOCSIWENCODEEXT]: Operation not supported > ioctl[SIOCSIWENCODE]: Input/output error > ioctl[SIOCSIWENCODEEXT]: Operation not supported > ioctl[SIOCSIWENCODE]: Input/output error > > Going to try updating and upgrading now. > > > Al Johnson skrev: > >> I am using WPA-PSK successfully on the Freerunner using a simple >> wpa_supplicant.conf and one extra line in /etc/network/interfaces as >> described at the end of http://wiki.openmoko.org/wiki/GTA02_wlan >> It is on interface eth0 and the driver is compiled into the kernel rather >> than >> being a module. >> >> I haven't tried this with the original image, but it has worked on every >> other >> image I've tried. The original image may be using an older wpa_supplicant >> version where the default driver was hostap (for prism2) not wext as it is >> in >> the current images. If so then you either need to supply the option -Dwext >> on >> the wpa_supplicant command line, or add an extra line >> to /etc/network/interfaces under the wpa-config one: >> wpa-driver wext >> >> On Saturday 05 July 2008, flexd wrote: >> >> >>> After some test and error on my FR, i have come to the conclusion that >>> encryption (any type of encryption) does not work on the FR (atleast not >>> the image it comes with), this seems to be either a kernel >>> bug/misconfiguration or a problem with wpa_supplicant itself, it seems >>> to be using PRISM2 drivers? But the card is atheros is it not? >>> >>> I am able to connect to open networks both the normal way (with >>> iwconfig) and with wpa_supplicant, however connecting to encrypted >>> networks has proven unsuccessful as wpa_supplicant complains about >>> setting the encryption with this message repeatedly: >>> >>> ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported >>> >>> Not sure what's going on, maybe someone with a bit more info could >>> reply.. :) >>> >>> Regards >>> >>> Kristoffer >>> >>> Alexander Paersch skrev: >>> >>> >>>> iwlist scanning works for me. I followed this guide: >>>> http://wiki.openmoko.org/wiki/GTA02_wlan >>>> >>>> On Sat, Jul 5, 2008 at 10:55 PM, Flyin_bbb8 <[EMAIL PROTECTED]> wrote: >>>> >>>> >>>>> iwconfig? Or >>>>> iwlist scanning? >>>>> >>>>> On 7/5/08, Christoph Anton Mitterer <[EMAIL PROTECTED]> wrote: >>>>> >>>>> >>>>>> Hi. >>>>>> >>>>>> I've received my GTA02 yesterday :-) >>>>>> >>>>>> Flashed it to the most recent version >>>>>> (http://downloads.openmoko.org/releases/Freerunner/)... >>>>>> Unfortunately,... when I try to use WLAN I get this: >>>>>> [EMAIL PROTECTED]:~# ifup wlan0 >>>>>> Error for wireless request "Set Mode" (8B06) : >>>>>> SET failed on device wlan0 ; No such device. >>>>>> Error for wireless request "Set ESSID" (8B1A) : >>>>>> SET failed on device wlan0 ; No such device. >>>>>> ifconfig: SIOCGIFFLAGS: No such device >>>>>> wlan0 No such device >>>>>> >>>>>> udhcpc: SIOCGIFINDEX: No such device >>>>>> [EMAIL PROTECTED]:~# >>>>>> >>>>>> >>>>>> And when I use the following config: >>>>>> # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8) >>>>>> >>>>>> # The loopback interface >>>>>> auto lo >>>>>> iface lo inet loopback >>>>>> >>>>>> iface wlan0 inet dhcp >>>>>> wpa-ssid "scientia.net" >>>>>> wpa-psk "secret" >>>>>> # wpa-scan-ssid 1 >>>>>> >>>>>> # Wireless interfaces >>>>>> #iface wlan0 inet dhcp >>>>>> #wireless_mode managed >>>>>> #wireless_essid any >>>>>> iface atml0 inet dhcp >>>>>> >>>>>> # Wired or wireless interfaces >>>>>> iface eth0 inet dhcp >>>>>> iface eth1 inet dhcp >>>>>> >>>>>> # Ethernet/RNDIS gadget (g_ether) >>>>>> # ... or on host side, usbnet and random hwaddr >>>>>> auto usb0 >>>>>> iface usb0 inet static >>>>>> address 192.168.200.2 >>>>>> netmask 255.255.255.0 >>>>>> network 192.168.200.0 >>>>>> gateway 192.168.200.1 >>>>>> up echo nameserver 192.168.200.1 >/etc/resolv.conf >>>>>> >>>>>> # Bluetooth networking >>>>>> iface bnep0 inet dhcp >>>>>> >>>>>> >>>>>> I get this: >>>>>> [EMAIL PROTECTED]:~# ifup wlan0 >>>>>> WPA: Configuring Interface >>>>>> ioctl[SIOCSIWPMKSA]: No such device >>>>>> ioctl[SIOCSIWMODE]: No such device >>>>>> Could not configure driver to use managed mode >>>>>> ioctl[SIOCGIFFLAGS]: No such device >>>>>> Could not set interface 'wlan0' UP >>>>>> ioctl[SIOCGIWRANGE]: No such device >>>>>> ioctl[SIOCGIFINDEX]: No such device >>>>>> ioctl[SIOCSIWENCODEEXT]: No such device >>>>>> ioctl[SIOCSIWENCODE]: No such device >>>>>> ioctl[SIOCSIWENCODEEXT]: No such device >>>>>> ioctl[SIOCSIWENCODE]: No such device >>>>>> ioctl[SIOCSIWENCODEEXT]: No such device >>>>>> ioctl[SIOCSIWENCODE]: No such device >>>>>> ioctl[SIOCSIWENCODEEXT]: No such device >>>>>> ioctl[SIOCSIWENCODE]: No such device >>>>>> ioctl[SIOCSIWAUTH]: No such device >>>>>> WEXT auth param 7 value 0x0 - Failed to disable WPA in the driver. >>>>>> ioctl[SIOCSIWAUTH]: No such device >>>>>> WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: No such device >>>>>> WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAP]: No such device >>>>>> ioctl[SIOCGIFFLAGS]: No such device >>>>>> wpa_supplicant: /usr/sbin/wpa_supplicant daemon failed to start >>>>>> FAILED >>>>>> Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or >>>>>> directory >>>>>> ifconfig: SIOCGIFFLAGS: No such device >>>>>> wlan0 No such device >>>>>> >>>>>> udhcpc: SIOCGIFINDEX: No such device >>>>>> [EMAIL PROTECTED]:~# >>>>>> >>>>>> >>>>>> >>>>>> Any ideas? >>>>>> >>>>>> Thanks, >>>>>> Chris. >>>>>> >>>>>> >>>>> -- >>>>> Sent from Gmail for mobile | mobile.google.com >>>>> >>>>> _______________________________________________ >>>>> Openmoko community mailing list >>>>> community@lists.openmoko.org >>>>> http://lists.openmoko.org/mailman/listinfo/community >>>>> >>>>> >>>> _______________________________________________ >>>> Openmoko community mailing list >>>> community@lists.openmoko.org >>>> http://lists.openmoko.org/mailman/listinfo/community >>>> >>>> >>>> --- >>>> avast! Antivirus: Innkommende melding renset. >>>> Virus Database (VPS): 080705-0, 05.07.2008 >>>> Sist testet: 06.07.2008 00:45:49 >>>> avast! - copyright (c) 1988-2008 ALWIL Software. >>>> http://www.avast.com >>>> >>>> >>> _______________________________________________ >>> Openmoko community mailing list >>> community@lists.openmoko.org >>> http://lists.openmoko.org/mailman/listinfo/community >>> >>> >> >> _______________________________________________ >> Openmoko community mailing list >> community@lists.openmoko.org >> http://lists.openmoko.org/mailman/listinfo/community >> >> >> --- >> avast! Antivirus: Innkommende melding renset. >> Virus Database (VPS): 080705-0, 05.07.2008 >> Sist testet: 06.07.2008 13:09:09 >> avast! - copyright (c) 1988-2008 ALWIL Software. >> http://www.avast.com >> >> >> >> >> >> > > > _______________________________________________ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > > > --- > avast! Antivirus: Innkommende melding renset. > Virus Database (VPS): 080705-0, 05.07.2008 > Sist testet: 06.07.2008 13:32:36 > avast! - copyright (c) 1988-2008 ALWIL Software. > http://www.avast.com > > > > > _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community