Hi,
over here wifi is up and runninng using wpa-psk. i get almost the same errors,
only missing the lines with
ioctl[SIOCSIWENCODE]: Input/output error
- but its working. you could try running wpa_supplicant with the -dd option
(and | less, maybe) and see what the output tells you.
my wpa_supplicant.conf:
------------------
ctrl_interface=/var/run/wpa_supplicant
eapol_version=1
ap_scan=1
# WPA2:
network={
ssid="myNetSSID"
scan_ssid=1
# proto=RSN
key_mgmt=WPA-PSK
pairwise=TKIP
group=TKIP
psk="secretpassword"
priority=50
}
-------------------
and in my /etc/network/interfaces
# Wired or wireless interfaces
iface eth0 inet dhcp
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
wpa-driver wext
cheers
markus
Am Sonntag, 6. Juli 2008 13:33:23 schrieb flexd:
> After updating and upgrading i now get exactly the same error as when i
> specified -Dwext, so something is wrong something still :/
>
> anyone got any ideas?
>
> regards
>
> Kristoffer
>
> flexd skrev:
> > This is not working (adding -Dwext) i only get additional errors then:
> >
> > ioctl[SIOCSIWENCODEEXT]: Operation not supported
> > ioctl[SIOCSIWENCODE]: Input/output error
> > ioctl[SIOCSIWENCODEEXT]: Operation not supported
> > ioctl[SIOCSIWENCODE]: Input/output error
> > ioctl[SIOCSIWENCODEEXT]: Operation not supported
> > ioctl[SIOCSIWENCODE]: Input/output error
> > ioctl[SIOCSIWENCODEEXT]: Operation not supported
> > ioctl[SIOCSIWENCODE]: Input/output error
> >
> > Going to try updating and upgrading now.
_______________________________________________
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
