I would like to boot Qtopia from SD, but couldn't yet... Can I do that with the image of Qtopia you mentioned ? I extracted the files form the .jffs2 and copied them on the microSD card. I then put the uImage bin in /boot
But trying to boot from the freerunner on SD I only get : "Unable to read uImage.bin from mmc 1:1 Booting image at 32000000 Bad magic number" I tried with SD card formated in ext3 and ext2. Was that a correct method ? What is wrong ? ps. to extract from .jffs2 I used the method found here (I use ubuntu 8.04, 64 bit) : http://maemo.org/community/wiki/modifyingrootimage/ "Kernel Memory Emulating a MTD : mknod /tmp/mtdblock0 b 31 0 modprobe mtdblock modprobe mtdram total_size=65536 erase_size=256 modprobe jffs2 dd if=/pathtoimage/rootfs.jffs2 of=/tmp/mtdblock0 mkdir /media/jffs2 mount -t jffs2 /tmp/mtdblock0 /media/jffs2 " On Sat, Jul 12, 2008 at 11:39, <[EMAIL PROTECTED]> wrote: >> Clare wrote: >>> (Or is there some way i can make .jffs2 into tar.gz?) >> And back...? > > using a <directory> to get the contents of de tar.gz and and using > mkfs.jffs2 -r <directory> -e 0x4000 -o <output file> > > _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community