Thanks a lot, I really missed that 2 points... now I could get it boot the last Qtopia image (extracted from the jffs2) from the microSD
I can start some testing ! :-) First boot was ok, pin unlocked, gsm network ok, first sight ok.... No sound... but I've read there was something to do to correct... so should be fine On Sun, Jul 13, 2008 at 21:02, Thomas B. <[EMAIL PROTECTED]> wrote: > It seems you have to use ext3 for the rootfs partition, because current > kernel builds have ext2 support only as a module (which is not yet > available before the rootfs is mounted). > > Then I had the following problem: U-Boot told the kernel that the rootfs > was ext2, even if it was ext3, so the kernel couldn't mount it. I solved > that by logging in to the U-Boot console via USB and modifying the > command sequence to boot from SD so that it looks like this (I just > replaced ext2 with ext3): > > menu_1=Boot from microSD (FAT+ext3): setenv bootargs ${bootargs_base} > rootfstype=ext3 root=/dev/mmcblk0p2 rootdelay=5 ${mtdparts} ro; mmcinit; > fatload mmc 1 0x32000000 ${sd_image_name}; bootm 0x32000000 > > Here you can also see that it expects the kernel to be on a FAT > partition (it uses the command "fatload"). Maybe that could be changed, > so that it reads the kernel from the ext2 or ext3 partition itself, but > I don't know which commands U-Boot supports. > > HTH, > Thomas > > > _______________________________________________ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community