On Tue, Sep 23, 2008 at 05:24:16PM -0700, Dima Kogan wrote: > To check the raw data coming out of the device, do > > cat /dev/ttySAC1 | grep GGA > > This should give you a line of data every second or so. Once a fix has > been established, these lines contain latitude,longitude values in > plain ASCII. The gpsd daemon (whether true gpsd or fso-gpsd) should > make this data available on port 2947. Check this with > > nc 127.0.0.1 2947 | grep GGA > > If the daemon works, you should get the same data here, as above. Good > luck.
Exactly this is the most common problem. Please... * do NOT echo 1 > neo1973-pm-gps.0/pwron * do NOT read from /dev/ttySAC1 * do NOT write to /dev/ttySAC1 * do NOT run the original gpsd Then it should just work. Greetings, Sascha _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community