Don't want to hijack the thread this stems from "Re: [2008.9] Wifi very unreliable" but I mentioned there that external links from a wiki might not be the best idea and that I was having problems with external GPRS instructions linked from the relevant wiki page.
Continued at the bottom of this: Nishit Dave wrote: > On Fri, Oct 10, 2008 at 1:50 AM, Arigead <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>> wrote: > > > There is an external link on the GPRS wiki page to a German site for > installing the GSM Multiplexor and a GUI. I've been trying to get > those > instructions to work for the last couple of days. I assume I'm getting > something wrong but how can I be sure, given the speed things > change in > OpenMoko, the instructions still work. > > I was able to get them to work, and the Services GUI was quite handy. > However, I switched over to Qtextended last weekend. > > Have you installed all dependencies? Where is it that you have a > problem exactly? From a clean flash of a 2008 Daily from last week: Om2008.8-gta02-20080903.uImage.bin Om2008.8-gta02-20081007.rootfs.jffs2 And executing the commands echo "nameserver 208.67.222.222" > /etc/resolv.conf echo "nameserver 208.67.220.220" >> /etc/resolv.conf echo "arch base 50" > /etc/opkg/angstrom-feed.conf echo "src/gz base http://www.angstrom-distribution.org/feeds/2008/ipk/glibc/armv opkg update opkg install gpsd opkg install gsm0710muxd Results in the following error message which is probably where I'm having problems. #opkg install gsm0710muxd Installing gsm0710muxd (0.9.1+r0-gitr3ff86b129640b647ccba3d86eb243d864671b039-r0) to root... Downloading http://www.angstrom-distribution.org/feeds/2008/ipk/glibc/armv4t/base/gsm0710muxd_0.9.1+r0-gitr3ff86b129640b647ccba3d86eb243d864671b039-r0_armv4t.ipk Upgrading libdbus-glib-1-2 on root from 0.74-r0 to 0.76-r0... Downloading http://www.angstrom-distribution.org/feeds/2008/ipk/glibc/armv4t/base/libdbus-glib-1-2_0.76-r0_armv4t.ipk Installing libgobject-2.0-0 (2.18.1-r0) to root... Downloading http://www.angstrom-distribution.org/feeds/2008/ipk/glibc/armv4t/base/libgobject-2.0-0_2.18.1-r0_armv4t.ipk Configuring libdbus-glib-1-2 Collected errors: * Package libgobject-2.0-0 wants to install file /usr/lib/libgobject-2.0.so.0 But that file is already provided by package * libglib-2.0-0 Maybe the above is not a problem but if you've any advice I'll be very happy to get it. _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community