Indeed that was the problem. 'allow-hotplug' instead of 'auto' is the solution! PLEASE correct the WIKI asap!
Thanks for your prompt support Cheers Tony On Wed, Nov 5, 2008 at 10:13 PM, joezeewails <[EMAIL PROTECTED]> wrote: > Stefan Monnier wrote: > > > > That's probably not right. You probably want to try "allow-hotplug > > ubs0" instead. "auto" means to do it at boot time and it may just fail > > if (for some reason) the usb0 interface is not yet created. > > > > > > Stefan > > > I could confirm this. > It doesn't work with "auto usb0" with "allow-hotplug usb0" it works just > fine. > Every time I plug the Freerunner in my debian etch it brings the > interface up. > I use the version from the wiki with a extra freerunner script. > > My entry in /etc/network/interfaces: > > #freerunner > allow-hotplug usb0 > iface usb0 inet static > address 192.168.0.200 > netmask 255.255.255.0 > post-up /etc/network/freerunner start > pre-down /etc/network/freerunner stop > > > > Someone should correct the wiki, should I? > > > Cheers, > Joe > > > _______________________________________________ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community >
_______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community