Update on my Xubuntu 8.10 story. On Mon, Nov 24, 2008 at 8:19 PM, Torfinn Ingolfsen <[EMAIL PROTECTED]> wrote: > - Network Manager setup (with /etc/udev/rules.d/80-freerunner.rules > and /usr/local/sbin/freerunner-usb-add.sh) doesn't work.
Today there were some updates to Xubuntu (a new kernel among others). After a reboot the Network Manager method now works. It have the following drawbacks: 1) When I plug in my FreeRunner (or 1973) Network Manager rewrites /etc/resolv.conf, removing all lines. This (as others have already pointed out) effectively disables dns on my laptop. Not good, not acceptable. 2) If I plug in first the FreRunner, then the 1973 both usb0 and usb1 gets the ip address 192.168.0.200. Not good, but this can probably be fixed. Issue number 1 is a showstopper for the Network Manager method, unless Network Manager can be told to only add ip adresses for usb[0-9] intefaces and leave the routing alone. For now, I'm back to the manual method. -- Regards, Torfinn Ingolfsen _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community