Ed Kapitein a écrit : > Linus Gasser wrote: >> Hi, >> >> I have the same problem - did they put in a non-compatible kernel >> version with regards to module? Does anybody have a working Om 2008.12 >> version? >> >> I checked the md5sums and they seem to be OK. >> >> - Is it necessary to flash more than the JFFS and the uImage? >> - Do I need to flash the u-boot, too? >> - And what is the "lowlevel" for? >> - Does anyone have a working Om 2008.12 with USB and/or Wifi? >> >> Looking forward, >> >> Linus >> > Hi Linus, > > I ran into a similar problem. > The solution that worked for me was: > > dfu-util -a kernel -R -D Om2008.12-om-gta02.uImage.bin > dfu-util -a rootfs -R -D Om2008.12-om-gta02.rootfs.jffs2 > dfu-util -a u-boot -R -D gta02v5_and_up-u-boot.bin > > Some of that might not be needed, but i did it anyway. > After it booted i had no working usb. > so i powered it down, removed the battery and usb cord, waited a few > secs and powered it back on again. > Now it did work as expected. > notice that the first boot took almost 2 minutes, while the second boot > took a little under a a minute. > i hope this helps.
Hi, thanks, now it works. I must've fotgotten the kernel or so. Well, the Wifi-option is still not available from "Settings", but at least I can ssh into it using USB and then activate the Wifi. Linus _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community