Hi Swap38, There is no item in the "settings" panel, but working with iwconfig and wpa_supplicant works fine. Please take a look at http://wiki.openmoko.org/wiki/Wifi and use the manual method of setting up your network.
I find it usefull to start in a well known state, so i issue: ifconfig eth0 down iwconfig eth0 txpower off iwconfig eth0 channel 0 iwconfig eth0 essid off before i make new settings for the wireless connection. Good luck! Kind regards, Ed On Mon, 2008-12-22 at 01:47 -0800, swap38 wrote: > > swap38 wrote: > > > > Ed Kapitein a écrit : > >> I ran into a similar problem. > >> The solution that worked for me was: > >> > >> dfu-util -a kernel -R -D Om2008.12-om-gta02.uImage.bin > >> dfu-util -a rootfs -R -D Om2008.12-om-gta02.rootfs.jffs2 > >> dfu-util -a u-boot -R -D gta02v5_and_up-u-boot.bin > > > > I will retry to flash all manually. > > > > OK, ssh works fine now. > But there's no wifi settings :( > please, help ! > > /swap38 _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community