-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Somebody in the thread at some point said: |> I'm just adding some patches and doing some cleaning on it, I'll update |> the moredrivers kernels at http://people.openmoko.org/andy when I |> checked we didn't break the threshold stuff. | | Thanks, in the moredrivers kernel the accs are working now. But now I have the | following problems. | | When I use Qi it says it is not able to set some permissions and then hangs in | Angstroem login screen and I can not SSH into it. I also tried this from the | mailing list: | | "Just create a textfile "/boot/append-GTA02" and put whatever is needed as | kernel parameters in there - here is mine: | rw rootdelay=3 glamo_core.slow_memory=1"
Make sure you have the "rw" in there, and the /boot/append-GTA02 is in the partition with the rootfs. Try adding a space before the rw in case I mangled it with recent changes. It's a bug I think if the rootfs does not remount root rw. | When I use U-boot I have to change the boot environment because it's bigger | than 2 MB. I do that the following way: | setenv bootargs ${bootargs_base} ${mtdparts}; nand read.e 0x32000000 kernel; | bootm 0x32000000 | | Then I would normally save the environment with saveenv but the system boots | immediately after the setenv command. So how can I save it? You need to escape the ; with backslashes. Your setenv is only setting the text as far as the first ; as it stands, then taking the nand and bootm as new commands and running them right away. | Then it boots sucessfully but I can not ssh into the freerunner with message: | ssh: connect to host 192.168.0.202 port 22: No route to host What does ifconfig -a route -n say? dmesg on the PC side? - -Andy -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org iEYEARECAAYFAkmJmq4ACgkQOjLpvpq7dMr14ACfejv9eU6ErxHb9sTYZA4/vDy+ NDsAoI7zhHSKUlutgqz5xnoKUjwYQhl5 =WLi6 -----END PGP SIGNATURE----- _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community