On Thu, Feb 26, 2009 at 12:08 PM, "Marco Trevisan (Treviño)" <m...@3v1n0.net> wrote: > Florian Hackenberger wrote: >> I noticed that suspending / resuming on 2008.12 is quite fast compared >> to SHR. The difference which is most noticeable is that SHR switches to >> a virtual terminal before and right after suspending, as opposed to >> 2008.12 which resumes right into X. Is there a way to replicate this >> behaviour on SHR? I suspect that we could save at least a second of >> resume time, because printing and scrolling a few hundred lines of >> kernel log in addition to the mode switches takes a bit of time. > > Check your uboot commandline loglevel value... It highly impacts on the > suspend/resume time. I've set it to 3 (but some time ago was set by the > system to 8, and I had to wait more than 6-7 seconds to wake the phone, > while it generally takes just 1-2 secs). > > Those commands in the uBoot shell should do the work: > setenv bootargs roofstype=ext2 root=/dev/mmcblk0p2 console=tty0 > console=ttySAC2,115200 loglevel=3 > setenv bootargs_base rootfstype=jffs2 root=/dev/mtdblock6 > console=ttySAC2,115200 console=tty0 loglevel=3
Marco, I tried what you have above and it seems to work quite well. There is a small spelling mistake in the first command though: "roofstype" should be "rootfstype", correct? Also just to clarify, I almost missed it myself (caught it whilst doing a typo check), the first command is for a SD card bootloader, whereas the second command is for the internal flash? Wicked fast resume though, I like it. Regards, Cameron _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community