On Mon, Apr 20, 2009 at 7:32 PM, Bram Mertens <mertensb.ma...@gmail.com> wrote:
> On Mon, Apr 20, 2009 at 11:17 AM, Bram Mertens <mertensb.ma...@gmail.com> 
> wrote:
>> On Mon, Apr 20, 2009 at 4:06 AM, Rask Ingemann Lambertsen
>> <r...@sygehus.dk> wrote:
>>> On Mon, Apr 20, 2009 at 12:07:55AM +0200, Bram Mertens wrote:
>>>> Hi,
>>>>
>>>> I'm about ready to flash a new distro onto the FreRuuner main memory
>>>> but since it'll be the first time I wanted to try backing up the
>>>> existing distro first.  So I followed the steps on
>>>> http://wiki.openmoko.org/wiki/Backup .
>>>
>>>   Which version of U-Boot are you using? DFU Upload was broken at least
>>> until 2008-10-17.
>>>
>>> 2008-10-07      Harald Welte    u-boot: Fix DFU upload in u-boot
>>> http://git.openmoko.org/?p=u-boot.git;a=commitdiff;h=414367bf5b65942947dd5d569c27d2a8e8e5e562
>>
>> I wrote it down because I intended to include it...
>>
>> I'll check when I get back home but this date looks familiar.
>>
>> As for reducing the backup: I'm trying to create a backup of the
>> initial image that came with the device so I'd like to avoid throwing
>> stuff away.
>>
>> So the recommendation would be to update the U-Boot with:
>> 1) backup exsitng U-Boot (http://wiki.openmoko.org/wiki/Backup):
>> Boot NOR boto menu
>> sudo ./dfu-util -a u-boot -R -U good-u-boot.bin
>> sudo ./dfu-util -a u-boot_env -R -U good-u-boot_env.bin
>>
>> 2) flash U-Boot
>> (http://wiki.openmoko.org/wiki/Flashing_the_Neo_FreeRunner#Flashing_the_boot_loader_to_the_NAND):
>> dfu-util -a u-boot -R -D uboot.bin
>>
>> Reboot the device to use the new U-Boot but the following reminder is
>> not very clear to me:
>> "Reminder: You should have boot from NOR first, in order to flash the
>> boot-loader in NAND. After flashing succesfully, make sure you reboot
>> from NAND's newly flashed boot loader, to benefit from the updates. "
>>
>> Does this mean I simply have to reboot the FreeRunner to the NOR boot
>> menu again, or do I have to boot to the NAND boot menu as
>> well/instead?
>>
>> And from which boot menu should I continue backing up the device?
>> From the NOR menu?
>>
>> Which u-boot.bin should I use?  And where should I get it?
>>
>> Thanks in advance.
>>
>> Bram
>>
>
> NOR boot menu shows: U-Boot 1.3.2-moko12 (May  9 2008 - 10:28:48)
> NAND boot menu shows: U-Boot 1.3.2-moko12 (Oct  7 2008 - 21:03:06)
>
> so I guess I need to update
>
> According to http://wiki.openmoko.org/wiki/U-boot the latest
> bootloader binary builds can be found under
> http://downloads.openmoko.org/distro/unstable/daily/ .  Are these
> considered "stable" despite being in the unstable "branch"?
>
> Which version is recommended at this stage?  The latest daily build
> (http://downloads.openmoko.org/distro/unstable/daily/om-gta02/20090420/)
> does not contain a uboot image.  The one from 20090419 does.
>
> Regards
>
> Bram Mertens
>

I tried using the
u-boot-gta02v5-1.3.1+gitrb20cc520a22715fe7ff069b36b7dfdbb925a8e5a-r1.bin
from http://downloads.openmoko.org/distro/unstable/daily/om-gta02/20090419/:

$ sudo dfu-util -a u-boot -R -D uboot.bin
dfu-util - (C) 2007-2008 by OpenMoko Inc.
This program is Free Software and has ABSOLUTELY NO WARRANTY

Opening USB Device 0x0000:0x0000...
Found Runtime: [0x1d50:0x5119] devnum=14, cfg=0, intf=0, alt=1, name="u-boot"
Claiming USB DFU Interface...
Setting Alternate Setting ...
Determining device status: state = dfuERROR, status = 14
dfuERROR, clearing status
Determining device status: state = dfuIDLE, status = 0
dfuIDLE, continuing
Transfer Size = 0x1000
bytes_per_hash=4338
Starting download:
[##################################################] finished!
state(2) = dfuIDLE, status(0) = No error condition is present
Done!
Resetting USB to switch back to runtime mode

While device was connected, I selected reboot option from the U-Boot menu.

Device powers down briefly, then displays the openmoko logo.  It sat
there doing nothing for a while so I unplugged the device. However the
openmoko logo remains on screen...

Is it supposed to take several minutes, it's been more than 15minutes already...

Should I reset the device?  Boot immediately to the NOR or NAND menu?

Thanks in advance.

Bram

_______________________________________________
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community

Reply via email to