On Mon, Apr 20, 2009 at 2:51 PM, Bram Mertens <mertensb.ma...@gmail.com> wrote: > On Mon, Apr 20, 2009 at 8:12 PM, Cameron Frazier > <frazier.came...@gmail.com> wrote: >> On Mon, Apr 20, 2009 at 2:03 PM, Bram Mertens <mertensb.ma...@gmail.com> >> wrote: >> <snip> >> >> Have you tried using NeoTool [1]? It's always worked quite well for >> me, and the backing up process avoids dfu-util. >> >> [1] http://wiki.openmoko.org/wiki/NeoTool > > I have tried to use it before when I initially went to pick up the > device but never succeeded, probably because we were using the wrong > files. > > And the instructions seemed clear enough to use the command line utility. > > The current problems/questions would have arisen with NeoTool anyway, > looks like I made a mistake when rebooting the device. > > So when you have flashed the U-Boot with NeoTool, how do you proceed? > Unplug it first, power down, then boot again or use the boot menu to > reboot? And did you boot the device normally or immediately into NOR > or NAND? > > The display still shows the openmoko logo, guess I'll have to hard > reset it though I hope that won't break anything...
I've always just: - flashed - powered down, which the FR seems to do on it's own once u-boot times out - unplug the usb, as I've found that leaving it in will cause hangs similar to what your seeing (oddly I don't have this issue with the AC adapter) - turn on pre normal procedure (power button for 8-10 sec) I use NeoTool most times since I like the backup method (having had numerous problems with dfu-util backups) and it helps to ensure I'm not throwing improper commands when I flash. I have little faith in the user on my end. Hope that helps. Cameron _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community