Hello, I finally found time to test this. Without a SD card in my FR, I only get the power off button. Cool! I hav a SD card partitioned like this: /dev/mmcblk0p1 - vfat, for storage /dev/mmcblk0p2 - ext3, QtMoko V22 /dev/mmcblk0p3 - ext3, QtMoko V23 /dev/mmcblk0p4 - swap
with the SD card inserted, I see no bootmenu - it just boots /dev/mmcblk0p2 every time. What's wrong? On Sat, Feb 13, 2010 at 3:25 PM, Marc Andre Tanner <openm...@brain-dump.org>wrote: > Hi, > > I finally found the time to package up my current state of things which > works ok here at least for GTA02. Kernel + Qi can be downloaded from: > > http://www.brain-dump.org/projects/qi-bootmenu/ > > It would be nice if the various distros out there could place their > kernels in /boot/uImage-$MACHINE.bin where $MACHINE is either GTA01 > or GTA02. This makes sure that they will be detected by qi-bootmenu. > You can optionally also place a logo in /boot/bootlogo.png which > will be displayed along the partition name. > > As for GTA01 support I'm playing around with a 2.6.32 based kernel > but with the initramfs embedded the result is to big ~2.4M. So we > need to shrink it by 400K to fit into the kernel partition. Not yet > sure how this should be done without either losing features (usb > network access for example) or repartitioning NAND (dropping the > uboot splash screen partition) but I personally don't want to take > the latter route, so we will see... > > Thanks, > Marc > > -- > Marc Andre Tanner >< http://www.brain-dump.org/ >< GPG key: CF7D56C0 > > _______________________________________________ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > -- mvh Torfinn
_______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
