Hi, On Sat, May 15, 2010 at 11:33 AM, Al Johnson <openm...@mazikeen.demon.co.uk>wrote:
> On Friday 14 May 2010, Torfinn Ingolfsen wrote: > > Hello, > > I finally found time to test this. > > Without a SD card in my FR, I only get the power off button. Cool! > > I hav a SD card partitioned like this: > > /dev/mmcblk0p1 - vfat, for storage > > /dev/mmcblk0p2 - ext3, QtMoko V22 > > /dev/mmcblk0p3 - ext3, QtMoko V23 > > /dev/mmcblk0p4 - swap > > > > with the SD card inserted, I see no bootmenu - it just boots > /dev/mmcblk0p2 > > every time. > > What's wrong? > > You forgot to tell Qi not to boot from the SD partitions. See: > http://wiki.openmoko.org/wiki/Qi#Files > > According to the readme[1] on the qi-bootmenu site, it is not necessary to mark the SD paryitions as not bootable: "The patches which are applied are thus not strictly necessary but they have a few advantages over vanilla Qi. - You won't have to mark your SD-card partition as not bootable via noboot-$MACHINE files" I found out that I could get the boot menu to show up if I did the "AUX press" move, but IMHO, that defeats the puprpose of the boot loader. I want it to show up automatically, each time I boot my FR. References: 1) http://repo.or.cz/w/qi-bootmenu-system.git/blob_plain/HEAD:/README -- Regards, Torfinn Ingolfsen
_______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community