Yes, you'd have to use the "-DYNA" in the test name for specific return codes to let Declude know NOT to check past the most recent hop, e.g.:
SBL ip4r zen.spamhaus.org 127.0.0.2 7 0 CBL-DYNA ip4r zen.spamhaus.org 127.0.0.4 1 0 PBL-DYNA ip4r zen.spamhaus.org 127.0.0.10 2 0 SWL-DYNA ip4r swl.spamhaus.org * -2 0 SPAMHAUS-DWL rhsbl _vouch.dwl.spamhaus.org * -1 0 The advantage of using ZEN is of course, that a single DNS lookup can be used and then evaluated for the different return codes by Declude. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Tuesday, November 05, 2013 11:40 AM To: [email protected] Subject: [MBF]Caution on using ZEN dnsbl. If you are checking mulitple hops in Declude, do not use ZEN as that includes PBL. PBL is a database of end user IP addresses that you should not be receiving email from, but if you are checking multiple hops declude will check that user IP and will then fail a ZEN test, even if the email came through a correct proper email server. >From Spamhaus: Caution: Because ZEN includes the XBL and PBL lists, do not use >ZEN on smarthosts or SMTP AUTH outbound servers for your own customers (or you >risk blocking your own customers). Do not use ZEN in filters that do any ‘deep >parsing’ of Received headers, or for other than checking IP addresses that >hand off to your mailservers. John T eServices For You ############################################################# This message is sent to you because you are subscribed to the mailing list <[email protected]>. To unsubscribe, E-mail to: <[email protected]> To switch to the DIGEST mode, E-mail to <[email protected]> To switch to the INDEX mode, E-mail to <[email protected]> Send administrative queries to <[email protected]>
