At 07:07 -0900 on 04/04/02, Musgrove, Jimmy W. wrote: >I have came across a CC that must have belonged to a John Deere dealer as it >has this tractor drawbar looking thing on the rear. Fit to pull hay balers >and discs, etc. I found a note in the FAQ that says to "simply push the >device firmly into the interior of the case". The device is not devisible
Unfortunately, the CC has metal shielding over the hole on the inside. You can remove that shielding, but you'll need to tape it back into place since it's attached with welded plastic nubs that break when you remove the shield. Alternatively, you could leave it in place. Removing them without getting into the Mac is virtually impossible; I've never succeeded despite repeated attempts. the pickle FAQ <http://macfaq.org/index.shtml> Software Archive <ftp://download:[EMAIL PROTECTED]//Users/thepickl/Sites/Archive/> _________________________________________________________________ -- Compact Macs is sponsored by <http://lowendmac.com/> and... SPECIAL LIST PRICES - Replacement Apple CDROMs from $19.99, MacOS 8.5 CD $79.99 PPC 5400/200Mhz 16/1.6GB/CD/ENET/L2 $119, 5+ for $99 <mailto:[EMAIL PROTECTED]> Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> The FAQ: <http://macfaq.org/> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
