FYI... I found good information at: http://home.earthlink.net/~gamba2/images/plus_analog.PDF
I static tested the components for the 5V output from power supply output T3 thru the capacitors and diodes to pin 11 of J4 and all appears well. I resoldered each pin along this path and the problem appears to be fixed. :) Chris -----Original Message----- From: Compact Macs [mailto:[EMAIL PROTECTED] On Behalf Of Christopher McGilton Sent: Monday, January 03, 2005 11:51 PM To: Compact Macs Subject: Date and Time Problem Mac Plus And It's Not The Battery Hi, I have a Mac Plus whereby the date and time will not work. It can be set but the date and time only advances after the machine has been on for a few hours or more. The battery has been replaced in the back of the machine with a new battery and this battery is good because I have tested it on a machine which does not have this problem and it works fine. I cleared the PRAM in an attempt to fix the problem but that doesn't help. I think there may be a bad component in the Mac. If so, which components should I check? Thanks, Chris -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[email protected]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- iPod Accessories for Less at 1-800-iPOD.COM Fast Delivery, Low Price, Good Deal www.1800ipod.com ---------------------------------------------------------------
