i've got the same output here and my cdrom dosen't work.. i got some error before about supermount but i for got what error exactly... mike
>From: "Henrique Helder" <[EMAIL PROTECTED]> >Reply-To: [EMAIL PROTECTED] >To: <[EMAIL PROTECTED]> >Subject: RE: TiPowerBook II doesn't recognize cdrom >Date: Mon, 25 Mar 2002 16:03:15 -0700 > > > >You can see if the kernel saw the CDROM with: > > > >dmesg | grep hdc (is it hdc on these machines?) > > > >On my Lombard: > > > >[root@powerbook-cooker templates]# ls -l /dev/cdrom > >lr-xr-xr-x 1 root root 13 Mar 25 03:18 /dev/cdrom -> > >cdroms/cdrom0 > > > >This is what i got: > >[root@hilands root]# dmesg | grep hdc >Kernel command line: root=/dev/hda5 ro hdc=ide-scsi devfs=mount >ide_setup: hdc=ide-scsi >hdc: MATSHITACD-RW CW-8121, ATAPI CD/DVD-ROM drive >hdc: Enabling MultiWord DMA 2 > >and for ide: > >[root@hilands root]# dmesg | grep ide >Kernel command line: root=/dev/hda5 ro hdc=ide-scsi devfs=mount >ide_setup: hdc=ide-scsi >ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx >pmac_ide: enabling IDE bus ID 2 >pmac_ide: enabling IDE bus ID 0 >pmac_ide: enabling IDE bus ID 1 >ide0 at 0xe5255000-0xe5255007,0xe5255160 on irq 19 >ide1 at 0xe5259000-0xe5259007,0xe5259160 on irq 20 >ide_pmac: Set UDMA timing for mode 4, reg:0x0c50038c >/dev/ide/host0/bus0/target0/lun0: [mac] p1 p2 p3 p4 p5 p6 p7 >ide_pmac: MDMA, cycleTime:120, accessTime:90, recTime:30 >ide_pmac: Set MDMA timing for mode 2, reg:0x00011d26 > >Thanks, > >Helder > _________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx
