http://qa.mandrakesoft.com/show_bug.cgi?id=5229
------- Additional Comments From [EMAIL PROTECTED] 2003-05-09 19:22 ------- Is it correct that your printer is an HP PSC 1210? According to http://hpoj.sourceforge.net/doc/device_id_strings.txt all PSC 1xxx models answer auto-detection requests the same way, they simply say that they are of the "psc 1200 series". The driver for all these printers is exactly the same one (they speak all the LIDIL language as the HP DeskJet 3320 and work with HP's HPIJS printer driver) so if printerdrake tells that it detected an HP PSC 1110 the printer will work. I do not know why you get the errors which you have shown. The HPOJ which I have packaged for the Cooker is the CVS version compiled against libusb as described on http://hpoj.sourceforge.net/todo.shtml section Known bugs in 0.90, fixed or documented as appropriate and checked into CVS third item. I will forward this report to the HPOJ developers list. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: I have upgraded from 9.1 and I have installed an hp 1210 usb printer. during the installation the printer was mistakenly recognized as hp 1110. I proceeded to correct the mistake by selecting the correct model (hp 1210), however after sending sevelar test pages nothing happens. the following is a portion of the messages file for your review. Jul 2 21:54:37 ABADON devfsd[99]: error calling: "unlink" in "GLOBAL" Jul 2 21:54:37 ABADON ptal-mlcd: SYSLOG at ExMgr.cpp:652, dev=<mlc:usb:psc_1200_series>, pid=1630, e=2, t=1057197277 ptal-mlcd successfully initialized. Jul 2 21:54:38 ABADON ptal-printd: ptal-printd(mlc:usb:psc_1200_series) successfully initialized using /var/run/ptal-printd/mlc_usb_psc_1200_series*. Jul 2 21:54:39 ABADON insmod: /lib/modules/2.4.22-1mdk/kernel/drivers/parport/parport_pc.o.gz: init_module: Device or resource busy Jul 2 21:54:39 ABADON insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg Jul 2 21:54:39 ABADON modprobe: modprobe: insmod parport_lowlevel failed Jul 2 21:54:39 ABADON kernel: lp: driver loaded but no devices found Jul 2 21:54:42 ABADON ptal-mlcd: ERROR at ExMgr.cpp:3760, dev=<mlc:usb:psc_1200_series@/dev/usb/lp0>, pid=1630, e=16, t=1057197282 Couldn't claim interface=2! Jul 2 21:54:42 ABADON ptal-mlcd: ERROR at ExMgr.cpp:2557, dev=<mlc:usb:psc_1200_series@/dev/usb/lp0>, pid=1630, e=16, t=1057197282 Couldn't set up MLC interface! Jul 2 21:54:45 ABADON cups: cupsd startup succeeded