http://qa.mandrakesoft.com/show_bug.cgi?id=5436
------- Additional Comments From [EMAIL PROTECTED] 2003-10-09 11:30 ------- it's on a laptop dell inspiron 8000, but gphoto2 was working well with mandrake 9.1 on this system. The camera is a canon powershot A70. usb 1.1 [EMAIL PROTECTED] alex]# cat /proc/bus/usb/devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=bce0 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=32 #Cfgs= 1 P: Vendor=04a9 ProdID=3073 Rev= 0.01 S: Manufacturer=Canon Inc. S: Product=Canon Digital Camera C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=06(still) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=96ms [EMAIL PROTECTED] alex]# i took it on an attached file to avoid difficult reading due to autosplit of wide line. thanks for your great (and difficult) job ! Alexandre -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: gphoto 2.1.2 is not able to get picture from my camera via usb. The camera is recognised, but transfert fail when triying to get the first picture. It's not a gphoto2 problem since i run gphoto2 2.1.2 (compiled from tarball) without any problem on my mdk 9.0 box. it seems to be a low level usb problem
