> > Hello, > I have a BIG :-))) problem. > > Using hd.img for install from ext2 partition fails on "second stage > ramdisk" ( or something like ) I get this error with Mandrake 7.2 beta as well. However, this machine is currently running Mandrake 7.1. I have an Epox MVP based Socket 7 system. I also have a Tekram U2 card attached to the system. However, the card is not currently in use. Also on the system. Hauppauge WinTV 401 Voodoo 3 Linksys LNE100TX NIC 20G IBM Deskstar ATA disk. Pioneer 10X DVD drive (atapi) Phillips CDD3610 CDrw (atapi,scsi emulated) Soundblaster 16/IDE (nonpnp) I also have a USB keyboard, mouse & joystick (all generica) as well as a 4-port hub that they all attach to. BTW, will 7.2 include USB support in the installer itself? I didn't experience any USB mouse support in the 7.1 installer and navigating Mandrake's installer with just the keyboard was rather tedious. > I think that this is a problem with my hardware. > On the same machine I have installed without problems: > SuSE 6.4 > Gentus 3.0a > RedHat 6.2 > Debian 2.2 > Slackware 7 ( and "test" ) > > The only error message is that the installation fails. > Before this I get "eax:...", this is a kernel error, I think. > My hardware: > > MB Soyo with Via chipset > 25 GB UDMA 66 > 2.5 GB ( old ) > ( on same IDE ) > Pioneer DVD rom ide 10x > HP cd writer 9110i > (on other IDE channel ) > Nvidia TNT2 with 32 MB ( non M64 ) > HFC based PCI card > Realtek 8029 PCI network card > PS/2 Mouse ( Logitech with wheel or MS Intellimouse ) > ( with 7.1 and Cooker 27/08 if change mouse to Intellimouse the point > disappear ) > PS/2 Keyboard > Wintv PCI card > external Elsa TLV 34 ISDN modem > SoundBlaster Live > > ( the second serial port is bios disabled by me ) > ----------------------------------------------------- > > Some other thing: > XFdrake ( and DrakConf ) write some default configuration that disable > , for example, my mouse settings ( "Buttons" "5" - "ZAxisMapping" "4 > 5" ). Also reset my monitor ( AOC 7GLR )to "" .... > This happens also if I choose to exit without changes. Just launch > XFdrake and exit!! > Another problem came using Matrox G400 16 MB AGP, the card is not > detected by XFdrake and I can choose only from low resolutions (max > 800x600 at 32K ). > .... XFdrake --expert --noauto and I can choose manually the card and > all resolutions are back! > > > Many thanks and best regards, > alessandro mailto:[EMAIL PROTECTED] > > >