Here you go.. /dev/hdd is the problem drive.. Also console 3 shows: found empty partition table on /dev/hdd at sector 0 Bad magic number /usr/bin/perl-install/partition_table_empty.pm line 31 On Sat, 14 Oct 2000, you wrote: > Ray <[EMAIL PROTECTED]> writes: > > The problem is drakx...... Fdisk reads the drive fine and the OS sees it > > fine after install. I can mount it without any problem but drakx still > > can't see > > wait, i think i've found. Do you have the 256 first bytes of your drive > blank? > > i made an error for the detection of empty partition having 256 instead of > 512 > > :-( > > can you mail me the report.bug? > to get it: > > switch to console 2 > put a fat floppy in floppy drive > and type "bug" > > -> it will put report.bug on floppy and this file interests me :) > > > thanks, cu Pixel.
******************************************************************************** * lspci ******************************************************************************** Intel Corporation|440BX/ZX - 82443BX/ZX Host bridge (unknown ignore) Intel Corporation|440BX/ZX - 82443BX/ZX AGP bridge (unknown ignore) Intel Corporation|82371AB PIIX4 ISA (unknown unknown) Intel Corporation|82371AB PIIX4 IDE (STORAGE_IDE unknown) Intel Corporation|82371AB PIIX4 USB (SERIAL_USB usb-uhci) Intel Corporation|82371AB PIIX4 ACPI (unknown unknown) Intel Corporation|82557 [Ethernet Pro 100] (NETWORK_ETHERNET eepro100) SubVendor=0x8086 SubDevice=0x0009 Adaptec|AIC-7881U (STORAGE_SCSI aic7xxx) ATI|3D Rage Pro AGP 1X/2X (DISPLAY_VGA Card:ATI Mach64) SubVendor=0x1002 SubDevice=0x0061 ******************************************************************************** * pci_devices ******************************************************************************** 0000 80867190 0 f8000008 00000000 00000000 00000000 00000000 00000000 00000000 0008 80867191 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0038 80867110 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0039 80867111 0 00000000 00000000 00000000 00000000 0000ffa1 00000000 00000000 003a 80867112 0 00000000 00000000 00000000 00000000 0000ef81 00000000 00000000 003b 80867113 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0080 80861229 b fc5ff008 0000ef41 feb00000 00000000 00000000 00000000 fea00000 00a0 90048178 5 0000e801 fe9ff000 00000000 00000000 00000000 00000000 fe9e0000 0100 10024742 b fd000000 0000d801 fe6ff000 00000000 00000000 00000000 fe6c0000 ******************************************************************************** * fdisk ******************************************************************************** Disk /dev/sda: 64 heads, 32 sectors, 1002 cylinders Units = cylinders of 2048 * 512 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 995 1018864 83 Linux /dev/sda2 996 1002 7168 82 Linux swap Disk /dev/sdb: 255 heads, 63 sectors, 529 cylinders Units = cylinders of 16065 * 512 bytes Device Boot Start End Blocks Id System /dev/sdb1 * 1 529 4249161 83 Linux Disk /dev/hda: 255 heads, 63 sectors, 1247 cylinders Units = cylinders of 16065 * 512 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 1247 10016496 83 Linux Disk /dev/hdb: 1 heads, 1316380 sectors, 1 cylinders Units = cylinders of 1316380 * 512 bytes Disk /dev/hdc: 16 heads, 63 sectors, 26354 cylinders Units = cylinders of 1008 * 512 bytes Device Boot Start End Blocks Id System /dev/hdc1 * 1 26280 13245088+ 83 Linux /dev/hdc2 26281 26354 37296 82 Linux swap Disk /dev/hdd: 16 heads, 63 sectors, 25228 cylinders Units = cylinders of 1008 * 512 bytes Device Boot Start End Blocks Id System /dev/hdd1 * 1 24380 12287488+ 83 Linux /dev/hdd2 24381 25228 427392 5 Extended /dev/hdd5 24381 25228 427360+ 82 Linux swap ******************************************************************************** * scsi ******************************************************************************** Attached devices: Host: scsi0 Channel: 00 Id: 01 Lun: 00 Vendor: SONY Model: CD-R CDU920S Rev: 2.0b Type: WORM ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 02 Lun: 00 Vendor: MICROP Model: 4110-09NB_Nov18F Rev: TN0F Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 03 Lun: 00 Vendor: FUJITSU Model: M2954Q-512 Rev: 0147 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 05 Lun: 00 Vendor: HP Model: HP35470A Rev: 1009 Type: Sequential-Access ANSI SCSI revision: 02 ******************************************************************************** * lsmod ******************************************************************************** vfat 9116 1 fat 29920 1 [vfat] parport_pc 7376 0 parport 6988 0 [parport_pc] sd_mod 17480 0 aic7xxx 132804 0 scsi_mod 38468 2 [sd_mod aic7xxx] serial 18804 0 usbcore 41992 0 af_packet 5956 0 (unused) ide-cd 24192 1 cdrom 29724 0 [ide-cd] isofs 16668 1 ******************************************************************************** * cmdline ******************************************************************************** ramdisk_size=32000 initrd=all.rdz cdrom vga=788 BOOT_IMAGE=vmlinuz auto ******************************************************************************** * pcmcia: stab ******************************************************************************** ******************************************************************************** * usb ******************************************************************************** ******************************************************************************** * partitions ******************************************************************************** major minor #blocks name 8 0 1026940 sda 8 1 1018864 sda1 8 2 7168 sda2 8 16 4249253 sdb 8 17 4249161 sdb1 3 0 10022040 hda 3 1 10016496 hda1 3 64 658190 hdb 22 0 13282416 hdc 22 1 13245088 hdc1 22 2 37296 hdc2 22 64 12714912 hdd 22 65 12287488 hdd1 22 66 1 hdd2 22 69 427360 hdd5 ******************************************************************************** * cpuinfo ******************************************************************************** processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 7 model name : Pentium III (Katmai) stepping : 3 cpu MHz : 501.144 cache size : 512 KB fdiv_bug : no hlt_bug : no sep_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr xmm bogomips : 999.42 ******************************************************************************** * syslog ******************************************************************************** got socket bound socket <4>Linux version 2.2.17-BOOT9 ([EMAIL PROTECTED]) (gcc driver version 2.95.3 19991030 (prerelease) executing gcc version egcs-2.91.66) #4 Fri Oct 6 12:26:34 CEST 2000 <4>Detected 501144 kHz processor. <4>Console: colour dummy device 80x25 <4>Calibrating delay loop... 999.42 BogoMIPS <4>Memory: 61908k/66556k available (828k kernel code, 412k reserved, 1008k data, 116k init, 0k bigmem) <4>Dentry hash table entries: 16384 (order 5, 128k) <4>Buffer cache hash table entries: 65536 (order 6, 256k) <4>Page cache hash table entries: 16384 (order 4, 64k) <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <4>CPU: Intel Pentium III (Katmai) stepping 03 <6>Checking 386/387 coupling... OK, FPU using exception 16 error reporting. <6>Checking 'hlt' instruction... OK. <6>Checking for popad bug... OK. <4>POSIX conformance testing by UNIFIX <4>PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=1 <4>PCI: Using configuration type 1 <4>PCI: Probing PCI hardware <4>PCI: Enabling I/O for device 00:3a <6>Linux NET4.0 for Linux 2.2 <6>Based upon Swansea University Computer Society NET3.039 <6>NET4: Unix domain sockets 1.0 for Linux NET4.0. <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP <4>TCP: Hash tables configured (ehash 65536 bhash 65536) <4>Starting kswapd v 1.5 <4>vesafb: framebuffer at 0xfd000000, mapped to 0xc4800000, size 8192k <4>vesafb: mode is 800x600x16, linelength=1600, pages=7 <4>vesafb: protected mode interface info at c000:47cb <4>vesafb: scrolling: redraw <4>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 <4>Console: switching to colour frame buffer device 100x37 <4>fb0: VESA VGA frame buffer device <6>Detected PS/2 Mouse Port. <4>RAM disk driver initialized: 16 RAM disks of 32000K size <6>Uniform Multi-Platform E-IDE driver Revision: 6.30 <4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <4>PIIX4: IDE controller on PCI bus 00 dev 39 <4>PIIX4: chipset revision 1 <4>PIIX4: not 100% native mode: will probe irqs later <4> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA <4> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA <4>hda: WDC AC210200D, ATA DISK drive <4>hdb: SAMSUNG CD-ROM SC-148F, ATAPI CDROM drive <4>hdc: WDC WD136AA, ATA DISK drive <4>hdd: QUANTUM FIREBALL CR13.0A, ATA DISK drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <6>hda: WDC AC210200D, 9787MB w/1966kB Cache, CHS=1247/255/63 <6>hdc: WDC WD136AA, 12971MB w/2048kB Cache, CHS=26354/16/63 <6>hdd: QUANTUM FIREBALL CR13.0A, 12416MB w/418kB Cache, CHS=25228/16/63 <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <6>md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 <6>raid5: measuring checksumming speed <6>raid5: MMX detected, trying high-speed MMX checksum routines <4> pII_mmx : 1122.807 MB/sec <4> p5_mmx : 1173.861 MB/sec <4> 8regs : 860.298 MB/sec <4> 32regs : 516.636 MB/sec <4>using fastest function: p5_mmx (1173.861 MB/sec) <6>COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <[EMAIL PROTECTED]> <4>md.c: sizeof(mdp_super_t) = 4096 <4>Partition check: <4> hda: hda1 <4> hdc: hdc1 hdc2 <4> hdd: hdd1 hdd2 < hdd5 > <5>RAMDISK: Compressed image found at block 0 <6>autodetecting RAID arrays <4>autorun ... <4>... autorun DONE. <4>VFS: Mounted root (ext2 filesystem). <4>hdb: ATAPI 48X CD-ROM drive, 128kB Cache <6>Uniform CD-ROM driver Revision: 3.11 <7>VFS: Disk change detected on device ide0(3,64) <7>ISO 9660 Extensions: RRIP_1991A <6>usb.c: registered new driver usbdevfs <6>usb.c: registered new driver hub <6>usb-uhci.c: $Revision: 1.232 $ time 12:28:29 Oct 6 2000 <6>usb-uhci.c: High bandwidth mode enabled <3>usb-uhci.c: Found UHCI device with no IRQ assigned. Check BIOS settings! <6>Serial driver version 4.27 with no serial options enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>(scsi0) <Adaptec AHA-294X Ultra SCSI host adapter> found at PCI 0/20/0 <6>(scsi0) Wide Channel, SCSI ID=7, 16/255 SCBs <6>(scsi0) Cables present (Int-50 NO, Int-68 YES, Ext-68 YES) <6>(scsi0) Downloading sequencer code... 422 instructions downloaded <4>scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.31/3.2.4 <4> <Adaptec AHA-294X Ultra SCSI host adapter> <4>scsi : 1 host. <6>(scsi0:0:1:0) Synchronous at 4.0 Mbyte/sec, offset 15. <4> Vendor: SONY Model: CD-R CDU920S Rev: 2.0b <4> Type: WORM ANSI SCSI revision: 02 <6>(scsi0:0:2:0) Synchronous at 5.0 Mbyte/sec, offset 15. <4> Vendor: MICROP Model: 4110-09NB_Nov18F Rev: TN0F <4> Type: Direct-Access ANSI SCSI revision: 02 <6>(scsi0:0:3:0) Synchronous at 40.0 Mbyte/sec, offset 8. <4> Vendor: FUJITSU Model: M2954Q-512 Rev: 0147 <4> Type: Direct-Access ANSI SCSI revision: 02 <6>(scsi0:0:5:0) Synchronous at 5.0 Mbyte/sec, offset 8. <4> Vendor: HP Model: HP35470A Rev: 1009 <4> Type: Sequential-Access ANSI SCSI revision: 02 <4>Detected scsi disk sda at scsi0, channel 0, id 2, lun 0 <4>Detected scsi disk sdb at scsi0, channel 0, id 3, lun 0 <4>SCSI device sda: hdwr sector= 512 bytes. Sectors= 2053880 [1002 MB] [1.0 GB] <4> sda: sda1 sda2 <4>SCSI device sdb: hdwr sector= 512 bytes. Sectors= 8498506 [4149 MB] [4.1 GB] <4> sdb: sdb1 <6>parport0: PC-style at 0x378 [SPP,PS2] <4>imm: Version 2.03 (for Linux 2.0.0) <4>ppa: Version 2.03 (for Linux 2.2.x) <4>WARNING - no ppa compatible devices found. <4> As of 31/Aug/1998 Iomega started shipping parallel <4> port ZIP drives with a different interface which is <4> supported by the imm (ZIP Plus) driver. If the <4> cable is marked with "AutoDetect", this is what has <4> happened. <7>VFS: Disk change detected on device fd(2,0) ******************************************************************************** * ddcxinfos ******************************************************************************** ******************************************************************************** * ddebug.log ******************************************************************************** * second stage install running * running: rmmod vfat * running: rmmod msdos rmmod: module msdos is not loaded * running: rmmod fat * running: packdrake -x /lib/modules.cz /tmp af_packet.o extracting af_packet.o * running: insmod_ 2> /dev/tty5 -f /tmp/af_packet.o * running: packdrake -x /lib/modules.cz /tmp usbcore.o extracting usbcore.o * running: insmod_ 2> /dev/tty5 -f /tmp/usbcore.o * running: packdrake -x /lib/modules.cz /tmp usb-uhci.o extracting usb-uhci.o * running: insmod_ 2> /dev/tty5 -f /tmp/usb-uhci.o Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters * warning: insmod'ing module usb-uhci failed at /usr/bin/perl-install/modules.pm line 479. * running: packdrake -x /lib/modules.cz /tmp serial.o extracting serial.o * running: insmod_ 2> /dev/tty5 -f /tmp/serial.o * warning: rm of /usr/share/locale failed: No such file or directory * running: packdrake -x /usr/share/locale.cz2 /usr/share/locale en extracting misc/LC_MESSAGES extracting iso8859-15/LC_MESSAGES extracting misc/LC_NUMERIC extracting iso8859-15/LC_NUMERIC extracting iso8859-15 extracting misc/LC_MESSAGES/SYS_LC_MESSAGES extracting misc/LC_TIME extracting iso8859-15/LC_TIME extracting iso8859-15/LC_CTYPE extracting misc/LC_MONETARY extracting iso8859-15/LC_COLLATE extracting iso8859-15/LC_MONETARY extracting en * getFile VERSION () relGetFile VERSION * local getFile /tmp/rhimage/VERSION * Trying with server FBDev * starting step `selectLanguage' * trying to load en_US.po from /usr/bin/perl-install/po.cz2 * trying to load en.po from /usr/bin/perl-install/po.cz2 * unsetting unsafe mouse * loading keymap us * warning: failed to read kmap magic at /usr/bin/perl-install/keyboard.pm line 226, <F> chunk 1. * running: packdrake -x /usr/share/xmodmap.cz2 /tmp xmodmap.us extracting xmodmap.us * running: xmodmap /tmp/xmodmap.us * RPM_INSTALL_LANG: en * step `selectLanguage' finished * starting step `selectInstallClass' * step `selectInstallClass' finished * starting step `setupSCSI' * running: packdrake -x /lib/modules.cz /tmp scsi_mod.o extracting scsi_mod.o * running: insmod_ 2> /dev/tty5 -f /tmp/scsi_mod.o * running: packdrake -x /lib/modules.cz /tmp aic7xxx.o extracting aic7xxx.o * running: insmod_ 2> /dev/tty5 -f /tmp/aic7xxx.o * adding alias scsi_hostadapter to aic7xxx * adding alias block-major-11 to scsi_hostadapter * running: packdrake -x /lib/modules.cz /tmp sd_mod.o extracting sd_mod.o * running: insmod_ 2> /dev/tty5 -f /tmp/sd_mod.o * running: packdrake -x /lib/modules.cz /tmp parport.o extracting parport.o * running: insmod_ 2> /dev/tty5 -f /tmp/parport.o * running: packdrake -x /lib/modules.cz /tmp parport_pc.o extracting parport_pc.o * running: insmod_ 2> /dev/tty5 -f /tmp/parport_pc.o * running: packdrake -x /lib/modules.cz /tmp imm.o extracting imm.o * running: insmod_ 2> /dev/tty5 -f /tmp/imm.o Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters * warning: insmod'ing module imm failed at /usr/bin/perl-install/modules.pm line 479. * running: packdrake -x /lib/modules.cz /tmp ppa.o extracting ppa.o * running: insmod_ 2> /dev/tty5 -f /tmp/ppa.o Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters * warning: insmod'ing module ppa failed at /usr/bin/perl-install/modules.pm line 479. * step `setupSCSI' finished * starting step `selectMouse' * step `selectMouse' finished * starting step `selectKeyboard' * loading keymap us * warning: failed to read kmap magic at /usr/bin/perl-install/keyboard.pm line 226, <F> chunk 1. * running: packdrake -x /usr/share/xmodmap.cz2 /tmp xmodmap.us extracting xmodmap.us * running: xmodmap /tmp/xmodmap.us * RPM_INSTALL_LANG: en * step `selectKeyboard' finished * starting step `miscellaneous' * perImageAppend: * step `miscellaneous' finished * starting step `doPartitionDisks' * warning: bad magic number at /usr/bin/perl-install/partition_table_empty.pm line 31. * found a dos partition table on /dev/hda at sector 0 * warning: bad magic number at /usr/bin/perl-install/partition_table_empty.pm line 31. * found a dos partition table on /dev/hdc at sector 0 * found a empty partition table on /dev/hdd at sector 0 * warning: bad magic number at /usr/bin/perl-install/partition_table_empty.pm line 31. * found a dos partition table on /dev/sda at sector 0 * warning: bad magic number at /usr/bin/perl-install/partition_table_empty.pm line 31. * found a dos partition table on /dev/sdb at sector 0 ******************************************************************************** * install.log ********************************************************************************