ok - for some reason ide-scsi wasn't being loaded (?). so I added it to
/etc/modules and my cdr works now - it worked right from startup with rc3
On Sun, 15 Oct 2000, you wrote:
> My cdrecorder doesn't work with 2.2.17-21mdksmp for some reason now - it
> worked with 7.2b3 but not rc1. I notice there were not hdd=ide-scsi setting
> for the kernel in lilo so I added those, ran lilo and rebooted, and it
> still doesn't detect my Mitsumi 4801 as scsi - only ide.
>
> here's a snippet from dmesg, you can see I have an off board ide card which
> is not what my cdr is hooked to, only my hd's are, as they always have been
> but I did try it without the promise ATA100 also.
>
>
> hdc: FX322M, ATAPI CDROM drive
> hdd: CR-4801TE, ATAPI CDROM drive
> hde: IBM-DTLA-305020, ATA DISK drive
> hdf: Maxtor 92041U4, ATA DISK drive
> ide1 at 0x170-0x177,0x376 on irq 15
> ide2 at 0xd400-0xd407,0xd802 on irq 10
> hde: IBM-DTLA-305020, 19623MB w/380kB Cache, CHS=39870/16/63, UDMA(33)
> hdf: Maxtor 92041U4, 19541MB w/512kB Cache, CHS=39703/16/63, UDMA(66)
> hdc: ATAPI 32X CD-ROM drive, 256kB Cache
> Uniform CD-ROM driver Revision: 3.11
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
> raid5: measuring checksumming speed
> raid5: MMX detected, trying high-speed MMX checksum routines
> pII_mmx : 1203.579 MB/sec
> p5_mmx : 1226.820 MB/sec
> 8regs : 924.306 MB/sec
> 32regs : 545.211 MB/sec
> using fastest function: p5_mmx (1226.820 MB/sec)
> scsi : 0 hosts.
> scsi : detected total.
> md.c: sizeof(mdp_super_t) = 4096
> Partition check:
> hde: [PTBL] [1027/255/63] hde1 < hde5 hde6 hde7 hde8 hde9 >
> hdf: [PTBL] [1027/255/63] hdf1
