Pixel wrote:
> Elton Woo <[EMAIL PROTECTED]> writes:
>
> > [root@dhcp-19-3461 elton]# /proc/bus/usb/devices
> > bash: /proc/bus/usb/devices: Permission denied
>
> try
>
> [root@dhcp-19-3461 elton]# cat /proc/bus/usb/devices
[root@dhcp-19-3461 elton]# cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc=118/900 us (13%), #Int= 1, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=6800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=ff(vend.) Sub=00 Prot=ff MxPS= 8 #Cfgs= 1
P: Vendor=04b8 ProdID=0103 Rev= 0.01
S: Manufacturer=EPSON
S: Product=Perfection610
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbscanner
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c00c Rev= 6.10
S: Manufacturer=Logitech
S: Product=USB Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usb_mouse
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl= 10ms
[root@dhcp-19-3461 elton]#
... here's the result that get.
[REM: This is *after* I had edited the /etc/sane.d/epson.conf and
/etc/rc.d/rd.local,
as mentioned in my previous post].
Elton Woo ;-)
--
Have you been counted? See http://counter.li.org
[EMAIL PROTECTED] - ICQ#9984432 - Montreal, Quebec, CANADA.
Registered Linux User #193975. AMD-K2 CPU on board.
"You only live once, so let's make life easier for each other."
S/MIME Cryptographic Signature
