On Sun, 2002-09-22 at 18:03, John J. Allen wrote: > John Allen wrote: > > > The via-rhine driver loads, but no network access. Its now the > > hardware as XP on the same box can access the LAN. > > > > It may have something to do with driver using memory access rather > > than I/O access. Memory access is the default. > > > I have now tried with the linuxfet driver included on the Apogee CD-ROM, > and still no luck. Works perfect with Windows XP. > > i have the same troubles with EPoX 8k5a-3+ i can not force it to use 10Mb and to disable autonegotation and my net is 10 Mb :( :( tried option via-rhine options=0x10 fullduplex=0 tried option via-rhine options=0x20 fullduplex=0 tried option via-rhine options=0x10 tried option via-rhine options=0x20
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74) Subsystem: Unknown device 1695:3005 Flags: bus master, medium devsel, latency 32, IRQ 16 I/O ports at e000 [size=256] Memory at de81a000 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2 and i get a lot of errors: ia-rhine: reset finished after 5 microseconds. eth1: VIA VT6102 Rhine-II at 0xde819000, 00:04:61:43:6b:f3, IRQ 16. eth1: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. eth1: via_rhine_open() irq 16. eth1: reset finished after 5 microseconds. eth1: Setting full-duplex based on MII #1 link partner capability of 45e1. eth1: Done via_rhine_open(), status 0c1a MII status: 786d. bridge-eth1: enabling the bridge bridge-eth1: up eth1: Transmit frame #0 queued in slot 0. eth1: VIA Rhine monitor tick, status 0002. eth1: Transmit frame #1 queued in slot 1. eth1: Transmit frame #2 queued in slot 2. eth1: Transmit frame #3 queued in slot 3. eth1: VIA Rhine monitor tick, status 0002. eth1: VIA Rhine monitor tick, status 0002. eth1: VIA Rhine monitor tick, status 0003. eth1: VIA Rhine monitor tick, status 0003. eth1: VIA Rhine monitor tick, status 0003. eth1: VIA Rhine monitor tick, status 0003. eth1: Shutting down ethercard, status was 0c1a. bridge-eth1: disabling the bridge bridge-eth1: down eth0: Setting half-duplex based on auto-negotiated partner ability 0000. eth1: via_rhine_open() irq 16. eth1: reset finished after 5 microseconds. eth1: Done via_rhine_open(), status 081a MII status: 786d. bridge-eth1: enabling the bridge bridge-eth1: up eth1: Transmit frame #0 queued in slot 0. eth1: VIA Rhine monitor tick, status 0002. eth1: Transmit frame #1 queued in slot 1. eth1: Transmit frame #2 queued in slot 2. eth1: Transmit frame #3 queued in slot 3. eth1: VIA Rhine monitor tick, status 0003. eth1: Transmit frame #4 queued in slot 4. eth1: Transmit frame #5 queued in slot 5. eth1: Transmit frame #6 queued in slot 6. eth1: Transmit frame #7 queued in slot 7. eth1: Transmit frame #8 queued in slot 8. eth1: Transmit frame #9 queued in slot 9. NETDEV WATCHDOG: eth1: transmit timed out eth1: Transmit timed out, status 0003, PHY status 786d, resetting... eth1: reset finished after 5 microseconds. eth1: Transmit frame #0 queued in slot 0. eth1: Transmit frame #1 queued in slot 1. eth1: Transmit frame #2 queued in slot 2. eth1: VIA Rhine monitor tick, status 0003. eth1: Transmit frame #3 queued in slot 3. eth1: Transmit frame #4 queued in slot 4. eth1: Transmit frame #5 queued in slot 5. eth1: Transmit frame #6 queued in slot 6. eth1: Transmit frame #7 queued in slot 7. eth1: Transmit frame #8 queued in slot 8. eth1: Transmit frame #9 queued in slot 9. NETDEV WATCHDOG: eth1: transmit timed out eth1: Transmit timed out, status 0003, PHY status 786d, resetting... eth1: reset finished after 5 microseconds. eth1: Transmit frame #0 queued in slot 0. eth1: Transmit frame #1 queued in slot 1. eth1: Transmit frame #2 queued in slot 2. eth1: VIA Rhine monitor tick, status 0003. eth1: Transmit frame #3 queued in slot 3. eth1: Transmit frame #4 queued in slot 4. eth1: Transmit frame #5 queued in slot 5. eth1: Transmit frame #6 queued in slot 6. eth1: Transmit frame #7 queued in slot 7. eth1: Transmit frame #8 queued in slot 8. eth1: Transmit frame #9 queued in slot 9. NETDEV WATCHDOG: eth1: transmit timed out eth1: Transmit timed out, status 0003, PHY status 786d, resetting... eth1: reset finished after 5 microseconds. eth1: Transmit frame #0 queued in slot 0. eth1: Transmit frame #1 queued in slot 1. eth1: Transmit frame #2 queued in slot 2. eth1: VIA Rhine monitor tick, status 0003. eth1: Transmit frame #3 queued in slot 3. eth1: Transmit frame #4 queued in slot 4. eth1: Transmit frame #5 queued in slot 5. eth1: Transmit frame #6 queued in slot 6. eth1: Transmit frame #7 queued in slot 7. eth1: Transmit frame #8 queued in slot 8. eth1: Transmit frame #9 queued in slot 9. NETDEV WATCHDOG: eth1: transmit timed out eth1: Transmit timed out, status 0003, PHY status 7849, resetting... eth1: reset finished after 5 microseconds. eth1: Setting half-duplex based on MII #1 link partner capability of 0000. eth1: Transmit frame #0 queued in slot 0. eth1: Transmit frame #1 queued in slot 1. eth1: Transmit frame #2 queued in slot 2. eth1: VIA Rhine monitor tick, status 0002. eth1: Transmit frame #3 queued in slot 3. eth1: Transmit frame #4 queued in slot 4. eth1: Transmit frame #5 queued in slot 5. eth1: Transmit frame #6 queued in slot 6. eth1: Transmit frame #7 queued in slot 7. eth1: Transmit frame #8 queued in slot 8. eth1: Transmit frame #9 queued in slot 9. eth1: VIA Rhine monitor tick, status 0003. eth1: VIA Rhine monitor tick, status 0003. NETDEV WATCHDOG: eth1: transmit timed out eth1: Transmit timed out, status 0003, PHY status 786d, resetting... eth1: reset finished after 5 microseconds. eth1: Transmit frame #0 queued in slot 0. eth1: Transmit frame #1 queued in slot 1. eth1: Transmit frame #2 queued in slot 2. eth1: Transmit frame #3 queued in slot 3. eth1: Transmit frame #4 queued in slot 4. eth1: Transmit frame #5 queued in slot 5. eth1: Transmit frame #6 queued in slot 6. eth1: Transmit frame #7 queued in slot 7. eth1: Transmit frame #8 queued in slot 8. eth1: Transmit frame #9 queued in slot 9. NETDEV WATCHDOG: eth1: transmit timed out eth1: Transmit timed out, status 0003, PHY status 786d, resetting... eth1: reset finished after 5 microseconds. eth1: Transmit frame #0 queued in slot 0. eth1: Transmit frame #1 queued in slot 1. eth1: Transmit frame #2 queued in slot 2. eth1: Transmit frame #3 queued in slot 3. eth1: Transmit frame #4 queued in slot 4. eth1: Transmit frame #5 queued in slot 5. eth1: Transmit frame #6 queued in slot 6. eth1: Transmit frame #7 queued in slot 7. eth1: Transmit frame #8 queued in slot 8. eth1: Transmit frame #9 queued in slot 9. NETDEV WATCHDOG: eth1: transmit timed out eth1: Transmit timed out, status 0003, PHY status 786d, resetting... eth1: reset finished after 5 microseconds. eth1: VIA Rhine monitor tick, status 0000. eth1: Transmit frame #0 queued in slot 0. eth1: Transmit frame #1 queued in slot 1. eth1: Transmit frame #2 queued in slot 2. eth1: Transmit frame #3 queued in slot 3. eth1: Transmit frame #4 queued in slot 4. eth1: Transmit frame #5 queued in slot 5. eth1: Transmit frame #6 queued in slot 6. eth1: Transmit frame #7 queued in slot 7. eth1: Transmit frame #8 queued in slot 8. eth1: Transmit frame #9 queued in slot 9. NETDEV WATCHDOG: eth1: transmit timed out eth1: Transmit timed out, status 0003, PHY status 786d, resetting... eth1: reset finished after 5 microseconds. eth1: VIA Rhine monitor tick, status 0000. eth1: Transmit frame #0 queued in slot 0. eth1: Transmit frame #1 queued in slot 1. eth1: Transmit frame #2 queued in slot 2. eth1: Transmit frame #3 queued in slot 3. eth1: Transmit frame #4 queued in slot 4. eth1: Transmit frame #5 queued in slot 5. eth1: Transmit frame #6 queued in slot 6. eth1: Transmit frame #7 queued in slot 7. eth1: Transmit frame #8 queued in slot 8. eth1: Transmit frame #9 queued in slot 9. NETDEV WATCHDOG: eth1: transmit timed out eth1: Transmit timed out, status 0003, PHY status 786d, resetting... eth1: reset finished after 5 microseconds. eth1: VIA Rhine monitor tick, status 0000. eth1: Transmit frame #0 queued in slot 0. eth1: VIA Rhine monitor tick, status 0003. eth1: VIA Rhine monitor tick, status 0003.