https://qa.mandrakesoft.com/show_bug.cgi?id=880
------- Additional Comments From [EMAIL PROTECTED] 2003-02-04 13:48 ------- I tried and tried with different boot parameters and I still can't access the drive on HighPoint contrller. I laso get a lot of errors like these during bootup: hde: read_intr: status=0x51 { DriveReady SeekComplete Error } hde: read_intr: error=0x04 { DriveStatusError } hde: read_intr: status=0x51 { DriveReady SeekComplete Error } hde: read_intr: error=0x04 { DriveStatusError } hde: read_intr: status=0x51 { DriveReady SeekComplete Error } hde: read_intr: error=0x04 { DriveStatusError } hde: read_intr: status=0x51 { DriveReady SeekComplete Error } hde: read_intr: error=0x04 { DriveStatusError } ide2: reset: success hde: read_intr: status=0x51 { DriveReady SeekComplete Error } hde: read_intr: error=0x04 { DriveStatusError } end_request: I/O error, dev 21:00 (hde), sector 2 hde: read_intr: status=0x51 { DriveReady SeekComplete Error } hde: read_intr: error=0x04 { DriveStatusError } hde: read_intr: status=0x51 { DriveReady SeekComplete Error } hde: read_intr: error=0x04 { DriveStatusError } hde: read_intr: status=0x51 { DriveReady SeekComplete Error } hde: read_intr: error=0x04 { DriveStatusError } hde: read_intr: status=0x51 { DriveReady SeekComplete Error } hde: read_intr: error=0x04 { DriveStatusError } ide2: reset: success hde: read_intr: status=0x51 { DriveReady SeekComplete Error } hde: read_intr: error=0x04 { DriveStatusError } hde: read_intr: status=0x51 { DriveReady SeekComplete Error } hde: read_intr: error=0x04 { DriveStatusError } hde: read_intr: status=0x51 { DriveReady SeekComplete Error } hde: read_intr: error=0x04 { DriveStatusError } hde: read_intr: status=0x51 { DriveReady SeekComplete Error } hde: read_intr: error=0x04 { DriveStatusError } ide2: reset: success hde: read_intr: status=0x51 { DriveReady SeekComplete Error } hde: read_intr: error=0x04 { DriveStatusError } end_request: I/O error, dev 21:00 (hde), sector 4 ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] description: I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only thing I get on screen is some debug info and some error message about /dev/hde. On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots just fine on the same computer. The BIOS version is A9 and the BIOS version of HPT370 is 2.34.