On Thu, Oct 9, 2008 at 12:11 PM, Roman Yeryomin <[EMAIL PROTECTED]> wrote:
> ./build/util/lar/lar -l bios.bin > normal/option_table (1200 bytes @0x50);loadaddress 0x0 entry 0x0 > normal/initram/segment0 (5976 bytes @0x550);loadaddress 0x0 entry 0x0x1015 > normal/stage2/segment0 (194760 bytes, zeroes compressed to 1 bytes > @0x1d00);loadaddress 0x0xd014 entry 0x0x2000 > normal/stage2/segment1 (34752 bytes @0x1d60);loadaddress 0x0x2000 > entry 0x0x2000 > normal/stage2/segment2 (6228 bytes @0xa570);loadaddress 0x0xb7c0 > entry 0x0x2000 > normal/payload/segment0 (3514056 bytes, zeroes compressed to 1 bytes > @0xbe20);loadaddress 0x0x1096a8 entry 0x0x10007c > normal/payload/segment1 (38568 bytes @0xbe80);loadaddress 0x0x100000 > entry 0x0x10007c > normal/payload/segment2 (72 bytes @0x15580);loadaddress 0x0x463570 > entry 0x0x10007c > blob/vsa (57504 bytes @0x15610);loadaddress 0x0 entry 0x0 > bootblock (20480 bytes @0x7b000) > Total size = 165534B 161KB (0x2869e) > > comparing to your image I don't have zerofill, does this matter? > > one more issue I've noticed: kernel boots fine and seems to work ok > but I don't have serial console anymore.. :( do you have it working on > your alix? what could be the problem? > > zerofill is needed for speed but not correctness. so you are saying a make in coreboot-v3 doesn't correctly set up the payload? ron -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot