Roman Yeryomin wrote: > finally I got it working! Great!
> versions/revisions I use: libpayload r3640, filo r80, coreboot r912 > didn't try compression yet but it works for me ONLY with preparsed > payload (and adding it manually, not within coreboot build system) Hm, ok. Yes, the build system doesn't include either VSA or payload. I'd love to get that fixed. > ./build/util/lar/lar -l bios.bin > Total size = 165534B 161KB (0x2869e) > > comparing to your image I don't have zerofill, does this matter? Only for boot speed. zerofill is used to "finalize" the larball so that scanning it's contents is as fast as possible. Without it, coreboot spends a lot of time during boot searching for files in unprogrammed flash memory. > one more issue I've noticed: kernel boots fine and seems to work ok > but I don't have serial console anymore.. :( do you have it working > on your alix? Yes, works well on the 1c. > what could be the problem? My 1c has the serial port on a superio chip. I recognize this problem from other boards. I also have a 3c3 where I saw this before I fried the 5536 ATA driver. //Peter -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot