On Thu, Oct 9, 2008 at 11:23 PM, Ward Vandewege <[EMAIL PROTECTED]> wrote: > On Thu, Oct 09, 2008 at 10:20:29PM +0200, Peter Stuge wrote: >> Roman Yeryomin wrote: >> > >> what could be the problem? >> > > >> > > My 1c has the serial port on a superio chip. I recognize this >> > > problem from other boards. I also have a 3c3 where I saw this >> > > before I fried the 5536 ATA driver. >> > >> > Sorry didn't understand what you actually mean here... that I have >> > fried my hardware? >> >> Sorry! No not at all! >> >> The serial port on alix1c is on the Winbond superio chip. The alix2 >> and 3 boards do not have this superio chip and their serial port is >> connected directly to the 5536 - and this is probably the reason that >> serial doesn't work anymore. > > I don't understand - serial works fine for me on the 2c3. Getting serial to > work was in fact the 'hardest' part of doing the 2c3 port based on the .1c > code, because of the absense of the winbond superio chip. It required all of > changing a few lines of code :) >
that image you gave me.. serial works with it for you, right? (I didn't check) also what kind of linux distribution you have? does it work with busybox also? Roman -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
