On Wed, Nov 5, 2008 at 11:35 PM, Roman Yeryomin <[EMAIL PROTECTED]> wrote: > On Wed, Nov 5, 2008 at 8:09 PM, Marc Jones <[EMAIL PROTECTED]> wrote: >> I see the problem. It is interesting that in some situations that it works. >> >> Marc >> >> >> -- >> Marc Jones >> Senior Firmware Engineer >> (970) 226-9684 Office >> mailto:[EMAIL PROTECTED] >> http://www.amd.com/embeddedprocessors >> >> LPC serial IRQs were being left enabled when there is no LPC serial device. >> >> Signed-off-by: Marc Jones <[EMAIL PROTECTED]> >> >> >> Index: mainboard/pcengines/alix2c3/dts >> =================================================================== >> --- mainboard/pcengines/alix2c3/dts (revision 980) >> +++ mainboard/pcengines/alix2c3/dts (working copy) >> @@ -34,9 +34,9 @@ >> /config/("southbridge/amd/cs5536/dts"); >> /* Interrupt enables for LPC bus. >> * Each bit is an IRQ 0-15. */ >> - lpc_serirq_enable = "0x0000105A"; >> + lpc_serirq_enable = "0x00001002"; >> /* LPC IRQ polarity. Each bit is an IRQ 0-15. */ >> - lpc_serirq_polarity = "0x0000EFA5"; >> + lpc_serirq_polarity = "0x0000EFFD"; >> /* 0:continuous 1:quiet */ >> lpc_serirq_mode = "1"; >> /* GPIO(0-0x20) for INT D:C:B:A, 0xFF=none. >> >> > > tried this with my mods but didn't work > will try a clean build now.. >
WOW! Cool! :) It works! Roman -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
