Hi, I've tried Harald Gutman's ACPI patch for gigabyte m57sli and I can successfully boot Linux with it (straight from flash, 2MB), and, as a bonus, the proprietary NVIDIA driver for X works too with full glx acceleration, hurray!
There are still some errors in dmesg regarding ACPI, though, which is probably why the powernow cpu frequency scaling doesn't work yet. Most notably the FACP checksum is incorrect. For some strange reason, the ethernet device is 'renamed' to eth1, eth0 doesn't work. I've attached the output of dmesg.
Linux version 2.6.23.17-88.fc7 ([email protected]) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-27)) #2 SMP Sun May 24 23:21:47 CEST 2009 Command line: ro root=/dev/sda2 rhgb earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000001000 (reserved) BIOS-e820: 0000000000001000 - 00000000000a0000 (usable) BIOS-e820: 00000000000c0000 - 000000007fff0000 (usable) BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) console [earlyser0] enabled Entering add_active_range(0, 1, 160) 0 entries of 3200 used Entering add_active_range(0, 192, 524272) 1 entries of 3200 used end_pfn_map = 524288 DMI not present or invalid. ACPI: RSDP 000F0400, 0024 (r2 CORE ) ACPI: RSDT 7FFF0424, 0034 (r1 CORE RSDT 0 CORE 0) ACPI: FACP 7FFF4A47, 004A (r1 GBT NVDAACPI 0 NVDA 11BE2F) ACPI Warning (tbutils-0217): Incorrect checksum in table [FACP] - 1A, should be 83 [20070126] ACPI Error (tbfadt-0428): Required field "Pm1aEventBlock" has zero address and/or length: 0000000000002000/0 [20070126] ACPI Error (tbfadt-0428): Required field "Pm1aControlBlock" has zero address and/or length: 0000000000002004/0 [20070126] ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 000000000000201C/0 [20070126] ACPI Error (tbfadt-0428): Required field "PmTimerBlock" has zero address and/or length: 0000000000000000/0 [20070126] ACPI: DSDT 7FFF04AC, 459B (r1 GBT NVDAACPI 1000 INTL 20061109) ACPI: FACS 7FFF046C, 0040 ACPI: APIC 7FFF4B3B, 007C (r1 CORE MADT 0 CORE 0) ACPI: MCFG 7FFF4BB7, 002C (r1 CORE MCFG 0 CORE 0) ACPI: SRAT 7FFF4BE3, 00A0 (r1 CORE SRAT 0 CORE 0) SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: Node 0 PXM 0 0-a0000 Entering add_active_range(0, 1, 160) 0 entries of 3200 used SRAT: Node 0 PXM 0 0-80000000 Entering add_active_range(0, 1, 160) 1 entries of 3200 used Entering add_active_range(0, 192, 524272) 1 entries of 3200 used NUMA: Using 63 for the hash shift. Bootmem setup node 0 0000000000000000-000000007fff0000 Zone PFN ranges: DMA 1 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 1 -> 160 0: 192 -> 524272 On node 0 totalpages: 524239 DMA zone: 55 pages used for memmap DMA zone: 1374 pages reserved DMA zone: 2634 pages, LIFO batch:0 DMA32 zone: 7111 pages used for memmap DMA32 zone: 513065 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI Warning (tbutils-0217): Incorrect checksum in table [FACP] - 1A, should be 83 [20070126] ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xf7244000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xf7244000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000c0000 Allocating PCI resources starting at 88000000 (gap: 80000000:80000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 40664 bytes of per cpu data Built 1 zonelists in Node order. Total pages: 515699 Policy zone: DMA32 Kernel command line: ro root=/dev/sda2 rhgb earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Marking TSC unstable due to TSCs unsynchronized time.c: Detected 2800.017 MHz processor. Console: colour VGA+ 80x25 console handover: boot [earlyser0] -> real [ttyS0] Checking aperture... CPU 0: aperture @ f0000000 size 64 MB Memory: 2062516k/2097088k available (2591k kernel code, 34440k reserved, 1499k data, 304k init) SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 Calibrating delay using timer specific routine.. 5602.57 BogoMIPS (lpj=2801285) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. result 12500085 Detected 12.500 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 5599.24 BogoMIPS (lpj=2799622) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03 Brought up 2 CPUs sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=2080 bytes Time: 20:18:25 Date: 05/26/09 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: Using configuration type 1 ACPI Error (evevent-0305): No installed handler for fixed event [00000000] [20070126] ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:06.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *3 ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *4 ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *6 ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *12 ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *6 ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *12 ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *3 ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *4 ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *2 ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *2 ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *1 ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *1 ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 11 14 15) *8 ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *1 ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 11 14 15) *13 ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0 ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 ACPI Warning (tbutils-0217): Incorrect checksum in table [FACP] - 1A, should be 83 [20070126] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 2.21 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:01: ioport range 0x1000-0x107f has been reserved pnp: 00:01: ioport range 0x1080-0x10ff has been reserved pnp: 00:01: ioport range 0x1400-0x147f has been reserved pnp: 00:01: ioport range 0x1480-0x14ff has been reserved pnp: 00:01: ioport range 0x1800-0x187f has been reserved pnp: 00:01: ioport range 0x1880-0x18ff has been reserved pnp: 00:01: iomem range 0x0-0x0 could not be reserved pnp: 00:0d: iomem range 0xf0000000-0xf7ffffff could not be reserved pnp: 00:0e: iomem range 0xf0000-0xf3fff could not be reserved pnp: 00:0e: iomem range 0xf4000-0xf7fff could not be reserved pnp: 00:0e: iomem range 0xf8000-0xfbfff could not be reserved pnp: 00:0e: iomem range 0xfc000-0xfffff could not be reserved PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: f7100000-f71fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0a.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0f.0 IO window: 1000-1fff MEM window: f4000000-f70fffff PREFETCH window: e0000000-efffffff PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:00:0a.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 PCI: Setting latency timer of device 0000:00:0f.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 6291456 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1243369104.744:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 1019C3E54CBE9226 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:07:00.0 PCI: Setting latency timer of device 0000:00:0a.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0a.0:pcie00] PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] PCI: Setting latency timer of device 0000:00:0f.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0f.0:pcie00] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] Real Time Clock Driver v1.12ac hpet_acpi_add: no address or irqs in _CRS Non-volatile memory driver v1.2 Linux agpgart interface v0.102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A input: Macintosh mouse button emulation as /class/input/input0 sata_nv 0000:00:05.0: version 3.5 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:05.0 to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0x0000000000013000 ctl 0x0000000000013072 bmdma 0x0000000000012cd0 irq 23 ata2: SATA max UDMA/133 cmd 0x0000000000013010 ctl 0x0000000000013082 bmdma 0x0000000000012cd8 irq 23 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:05.1 to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0x0000000000013020 ctl 0x0000000000013092 bmdma 0x0000000000012ce0 irq 22 ata4: SATA max UDMA/133 cmd 0x0000000000013030 ctl 0x00000000000130a2 bmdma 0x0000000000012ce8 irq 22 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: Host Protected Area detected: current size: 625140335 sectors native size: 625142448 sectors ata4.00: ATA-7: Hitachi HDT725032VLA360, V54OA7EA, max UDMA/133 ata4.00: 625140335 sectors, multi 0: LBA48 NCQ (depth 0/32) ata4.00: Host Protected Area detected: current size: 625140335 sectors native size: 625142448 sectors ata4.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5 sd 3:0:0:0: [sda] 625140335 512-byte hardware sectors (320072 MB) sd 3:0:0:0: [sda] Write Protect is off sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sda] 625140335 512-byte hardware sectors (320072 MB) sd 3:0:0:0: [sda] Write Protect is off sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda4 sd 3:0:0:0: [sda] Attached SCSI disk ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:05.2 to 64 scsi4 : sata_nv scsi5 : sata_nv ata5: SATA max UDMA/133 cmd 0x0000000000013040 ctl 0x00000000000130b2 bmdma 0x0000000000012cf0 irq 21 ata6: SATA max UDMA/133 cmd 0x0000000000013050 ctl 0x00000000000130c2 bmdma 0x0000000000012cf8 irq 21 ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) pata_amd 0000:00:04.0: version 0.3.9 PCI: Setting latency timer of device 0000:00:04.0 to 64 scsi6 : pata_amd scsi7 : pata_amd ata7: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000012cc0 irq 14 ata8: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000012cc8 irq 15 ata8: port disabled. ignoring. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ processors (2 cpu cores) (version 2.00.00) powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: MP systems not supported by PSB BIOS structure Magic number: 9:341:347 hash matches device pci0000:00 input: ImPS/2 Generic Wheel Mouse as /class/input/input2 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 304k freed Write protecting the kernel read-only data: 1128k SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1243369108.449:2): selinux=0 auid=4294967295 register_blkdev: cannot get major 8 for sd register_blkdev: cannot get major 65 for sd register_blkdev: cannot get major 66 for sd register_blkdev: cannot get major 67 for sd register_blkdev: cannot get major 68 for sd register_blkdev: cannot get major 69 for sd register_blkdev: cannot get major 70 for sd register_blkdev: cannot get major 71 for sd register_blkdev: cannot get major 128 for sd register_blkdev: cannot get major 129 for sd register_blkdev: cannot get major 130 for sd register_blkdev: cannot get major 131 for sd register_blkdev: cannot get major 132 for sd register_blkdev: cannot get major 133 for sd register_blkdev: cannot get major 134 for sd register_blkdev: cannot get major 135 for sd sd 3:0:0:0: Attached scsi generic sg0 type 0 Floppy drive(s): fd0 is 1.44M ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 20, io mem 0xf724a000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected pnp: Device 00:0a activated. parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2c40 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2c80 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 23, io mem 0xf7245000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected input: PC Speaker as /class/input/input3 input: Power Button (FF) as /class/input/input4 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. ACPI: Power Button (FF) [PWRF] input: Sleep Button (FF) as /class/input/input5 ACPI: Sleep Button (FF) [SLPF] input: Power Button (CM) as /class/input/input6 ACPI: Power Button (CM) [PWRB] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 firewire_ohci: Added fw-ohci device 0000:01:0a.0, OHCI version 1.10 ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:08.0 to 64 forcedeth: using HIGHDMA nvidia: module license 'NVIDIA' taints kernel. firewire_core: created device fw0: GUID 001a4d5600ec9652, S400 eth0: forcedeth.c: subsystem: 01022:2b80 bound to 0000:00:08.0 ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [AAZA] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:06.1 to 64 net eth1: device_rename: sysfs_create_symlink failed (-17) udev: renamed network interface eth0 to eth1 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:07:00.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008 floppy0: no floppy controllers found EXT3 FS on sda2, internal journal Adding 2097136k swap on /dev/sda4. Priority:-1 extents:1 across:2097136k NET: Registered protocol family 10 lo: Disabled Privacy Extensions audit(1243369122.637:3): audit_pid=1596 old=0 by auid=4294967295 fuse init (API version 7.8) it87: Found IT8716F chip at 0x290, revision 0 it87: in3 is VCC (+5V) it87: in7 is VCCH (+5V Stand-By)
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
