Hey Nils, can you confirm r5470 works with your board?
If so, could you send me a complete boot log with that revision, please? Which board was that again? Which VSM module are you using? Stefan On 5/8/10 11:15 PM, Nils wrote: > Hi Stefan, > I tested your patch in the hope that my Geode GX2 board started to work again. > Unfortunatly it doesn`t. > My board stopped working after your vsm loading patches in rev5471. > The error after rev5471 was "hda: lost interrupt" . > Now after rev5532 with your improve realmode api patch the board oopses. > > I will not ack nor nack because i know to little about programming. > > Thanks,Nils. > > Last part of rev5532 + improve realmode api patch: > > sizeram: sizem 0x200 > setup_gx2_cache: enable for 524288 KB > msr 0x00001808 will be set to 25fff002:11ffe000 > MSR 0x10000026 is now 0x2dfbe040:0x400fffe0 > Preparing for VSA... > VSA: Real mode stub @00000600: 628 bytes > Check CBFS header at fffeffe0 > magic is 4f524243 > Found CBFS header at fffeffe0 > Check fallback/coreboot_ram > CBFS: follow chain: fff00000 + 38 + 79ab + align -> fff07a00 > Check fallback/payload > CBFS: follow chain: fff07a00 + 38 + 11038 + align -> fff18a80 > Check vsa > Stage: loading vsa @ 0x60000 (57868 bytes), entry @ 0x60020 > Stage: done loading. > VSA: Buffer @00060000 *[0k]=ba > VSA: Signature *[0x20-0x23] is b0:10:e6:80 > Calling VSA module... > oprom: INT# 0xd > oprom: eax: 11ffe000 ebx: 80007800 ecx: 00001012 edx: 25fff002 > oprom: ebp: 00000ff4 esp: 00000fec edi: 0000102d esi: 00000028 > oprom: ip: 0647 cs: 6000 flags: 00000013 > Oops, exception 13 while executing option rom > Unexpected Exception: 13 @ 6000:00000647 - Halting > Code: 0 eflags: 00000013 > eax: 11ffe000 ebx: 80007800 ecx: 00001012 edx: 25fff002 > edi: 0000102d esi: 00000028 ebp: 00000ff4 esp: 00000fec > > -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot