This solves the problem, thanks Karl!
Anish
On 03/16/11 15:44, Karl-Heinz Nirschl wrote:
Hi,
i think the following patch should do the trick:
---
Index: src/southbridge/intel/sch/Makefile.inc
===================================================================
--- src/southbridge/intel/sch/Makefile.inc (Revision 6439)
+++ src/southbridge/intel/sch/Makefile.inc (Arbeitskopie)
@@ -37,6 +37,6 @@
# We don't ship that, but booting without it is bound to fail
cbfs-files-$(CONFIG_HAVE_CMC) += cmc.bin
-cmc.bin-file := $(CONFIG_CMC_FILE)
+cmc.bin-file := $(call strip_quotes,$(CONFIG_CMC_FILE))
cmc.bin-type := 0xaa
cmc.bin-position := 0xfffd0000
---
best regards,
2011/3/15 Stefan Reinauer<stefan.reina...@coreboot.org>:
* Anish Patel<anish.mailing.l...@gmail.com> [110314 20:42]:
On 03/14/11 15:19, Anish Patel wrote:
Hi All,
I am trying to get coreboot running on my PC/104+ atom board.
I think i have everything pretty much good to go, except for one
problem.
When i try to build, it says it can't find my cmc.bin file, which
i have extracted from the factory bios and placed in many
different locations inside the coreboot build tree. As well as
tell coreboot the location of the cmc.bin file, yet everytime i
build i get this error.
GEN bootblock/ldscript.ld
LINK bootblock.elf
OBJCOPY coreboot.bootblock
make: *** No rule to make target `"cmc.bin"', needed by
`build/coreboot.pre1'. Stop.
any hints on where to place this file would be greatly
appreciared. as a note, i have made a oprom directory in the
coreboot root. this place hold my vgabios.bin which the coreboot
build system find an links properly.
thanks
anish
i have found the problem
reverting back the the Makefile.inc from r6199 for the sch fixed the
problem.
Which Makefile.inc. Can you please send a patch?
--
coreboot mailing list: coreboot@coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot
--
coreboot mailing list: coreboot@coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot