Hi, Am 17.06.2013 23:25 schrieb Tim Zander: > Am 17.06.2013 01:23 schrieb Damien Zammit: >> My current T60 status is "Bricked, in Bucts 1 configuration" > > I'm not sure what you did, but if this was you flashchips.c: > > > + .model_id = SST_SST25VF016B_T60, > > + .probe = probe_spi_res2, > > + .read = spi_chip_read, > > then things were wrong:
Only partially. > Change the .probe field to probe_spi_res1 No, probe_spi_res2 is correct. > Change the .model_id field to the RES1 ID given in the datasheet of > the flash chip The datasheet is clear on that: The RES ID is 2-byte. > Change the .write field to spi_chip_write_1 Yes, that one indeed should have been spi_chip_write_1. I'm sorry we didn't catch the usage of the wrong write function before you reflashed. Regards, Carl-Daniel -- http://www.hailfinger.org/ -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot