Bayou is not necessary - use SeaBIOS to run coreinfo. *./build/cbfstool ./build/coreboot.rom add-payload -f /gitrepo/coreboot/payloads/coreinfo/build/coreinfo.elf -n img/coreinfo.elf -t payload*
On Sun, Mar 20, 2016 at 7:02 PM, ron minnich <rminn...@gmail.com> wrote: > it's a bit of work but I got it to build two years ago. > > ron > > On Sun, Mar 20, 2016 at 6:56 PM Zheng Bao <fishb...@hotmail.com> wrote: > >> But Bayou seems to be dead. It can not be built. The definition like >> "struct LAR" goes nowhere. >> >> >> Zheng >> ------------------------------ >> From: rminn...@gmail.com >> Date: Sun, 20 Mar 2016 21:17:24 +0000 >> To: fishb...@hotmail.com; coreboot@coreboot.org; >> stefan.reina...@coreboot.org >> Subject: Re: [coreboot] Multiple payloads support? >> >> >> It was done about 10 years ago and it was called bayou. Take a look in >> the libpayload side. >> >> On Sat, Mar 19, 2016 at 11:30 PM Zheng Bao <fishb...@hotmail.com> wrote: >> >> Hi, all, >> I am trying to integrate SeaBIOS and another payload(coreinfo, nvramcui) >> into final image. >> >> After a quick code checking, current code in repo does not support >> multiple payload, does it? >> >> I want to let Coreboot load and run nvramcui first. The user can decide >> to change the >> CMOS setting or not. If user want to save the setting, the system need to >> reboot. If user wants >> to give up the change, the system goes out of the nvramcui and goes into >> SeaBIOS. Just like >> other IBV's BIOS. >> >> Did anyone do this job before? Any suggestion? >> >> Zheng >> -- >> coreboot mailing list: coreboot@coreboot.org >> https://www.coreboot.org/mailman/listinfo/coreboot >> >> >> -- coreboot mailing list: coreboot@coreboot.org >> https://www.coreboot.org/mailman/listinfo/coreboot >> > > -- > coreboot mailing list: coreboot@coreboot.org > https://www.coreboot.org/mailman/listinfo/coreboot >
-- coreboot mailing list: coreboot@coreboot.org https://www.coreboot.org/mailman/listinfo/coreboot